F111 on a stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I saw the F-111 from Captain_Ahab_62 and liked it. I found out that his version would print full size nicely at a 45…
- Ocena
- 4,5 / 5
- Polubienia
- 25
- Pobrania
- 262
- Wydruki
- 2
- Wyświetlenia
- 1457
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I saw the F-111 from Captain_Ahab_62 and liked it. I found out that his version would print full size nicely at a 45 degree angle on my FLSUN Q5 given it's smaller bed size, with minimal issues with the supports coming off. I tried printing in the original orientation at 75% but was unable to remove the supports.
I flew the F111 and always wanted one on a stand to display, so I designed this version using Tinkercad. I'm new at this so I'm happy this one worked out
This model needs supports for the wing tips to print right. Twice my prints failed just on the wing tips, when I tried to limit the supports to only the print bed (see photo below). Had to have everywhere support to work.
Enjoy.
Print Settings
Printer:
FLSUN Q5
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament:
Hatchbox PLA
Black
Notes:
Used zigzag supports everywhere with a 10% infill and a 52 degree support angle. This time the supports came off better
Final product
Original F111 Swept printed at a 45 with supports
one of the failed prints without enough support on the wingtips
Category: 3D Printing