5/8"-27 Dual Cold Shoe Mount Microphone Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter block that screws onto the end of a boom pole or any other standard microphone mount with 5/8"-27 threads. It…
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 204
- Wydruki
- 2
- Wyświetlenia
- 810
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Adapter block that screws onto the end of a boom pole or any other standard microphone mount with 5/8"-27 threads. It gives you two cold shoe mounts.
It's useful to mount equipment such as microphones and recorders that were designed to mount onto a DSLR's hot shoe. Two mounts allows you to have both the microphone and the recorder at the end of the pole bypassing the need for a long audio extension cable.
The shoe mount slot is slightly wider to allow any orientation (in 90-degree increments) to give the greatest flexibility to position your microphone.
Fusion 360 Design File Included!
Hope it's useful!
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
0.1mm
Infill:
20%
Filament:
Any PETG
Notes:
FDM Print Orientation: Print with the hole opening up to avoid any overhangs or bridging.
Printing at 0.1mm layer height seems good enough for the 27 TPI thread pitch on my print. YMMVPost-Printing
On the Print Bed -- Just after printing
Screws onto my boom pole just fine
Mounting my Rode VideoMic and my Zoom H1 recorder -- Didn't need to break out my long audio cable
How I Designed This
Fusion 360 File Included!
Category: Hobby