5/8"-27 Dual Cold Shoe Mount Microphone Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter block that screws onto the end of a boom pole or any other standard microphone mount with 5/8"-27 threads. It…
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 205
- Makes
- 2
- Views
- 815
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Adapter block that screws onto the end of a boom pole or any other standard microphone mount with 5/8"-27 threads. It gives you two cold shoe mounts.
It's useful to mount equipment such as microphones and recorders that were designed to mount onto a DSLR's hot shoe. Two mounts allows you to have both the microphone and the recorder at the end of the pole bypassing the need for a long audio extension cable.
The shoe mount slot is slightly wider to allow any orientation (in 90-degree increments) to give the greatest flexibility to position your microphone.
Fusion 360 Design File Included!
Hope it's useful!
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
0.1mm
Infill:
20%
Filament:
Any PETG
Notes:
FDM Print Orientation: Print with the hole opening up to avoid any overhangs or bridging.
Printing at 0.1mm layer height seems good enough for the 27 TPI thread pitch on my print. YMMVPost-Printing
On the Print Bed -- Just after printing
Screws onto my boom pole just fine
Mounting my Rode VideoMic and my Zoom H1 recorder -- Didn't need to break out my long audio cable
How I Designed This
Fusion 360 File Included!
Category: Hobby