Adafruit Goggle LED Diffuser Ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple easy to print LED diffuser ring for use with Adafruit Googles
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 672
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
LED diffuser ring for Adafruit goggles.
Simple ring to diffuse the LED's on the front of Adafruit goggles.
The ring is designed to fit over a NeoPixel Ring - 16 x 5050 RGB LED and also fits within the lens cap of the Adafruit goggles. The outer diameter of the ring is 51.5mm so this diffuser may also work for other goggles with the same diameter lens/lens cap.
I found the optimum thickness for my preference was 0.3mm, feel free to alter the Z dimension to suit your needs. Please note that this model is designed at 0.3mm thick therefore it should be printed at 0.10mm layer height to avoid issues and allow enough layers to be printed (3) to create an even diffusion when placed over the LED rings.
A quick and simple print that I hope will help others who may wish to diffuse their LED's.
Remember to print 2 rings, one for each eye.
If you enjoy this print then please do share your make, I would love to see what colours and filaments you chose for your print.
If you have any questions about 3D printing, whether it be queries or you need some tips or tricks feel free to reach out in the comments or by message, I am always more than happy to help if I can!