Liczymy pasujące modele…
Goblin gözlüğü. Orjinal gözlüğümü 3D tarayıcı ile taradım. Kapaklar ve gözler arası kordonu sıfırdan tasarladım. İsmimi anmak istemeyen olursa diye “GOBLINWORKS” yazmayan bir çerçeve de ekledim. PETG, ABS ile yazdırmanızı öneririm ama PLA…
Introduction: This is a goggle frame designed for fursuit heads with lots of customizable options! How to customize using OpenSCAD: Download OpenSCAD at https://openscad.org/ . Open the .scad file (Top left corner, File→Open File). Turn…
This swimming goggles case was designed after a box I had used over the years. It prints all at once, so please ensure that your printer is calibrated so that tolerances are working. Print settings: - Material: PLA - Nozzle: 0.4mm -…
Battery Holder with cable attachment for DJI FPV Goggles 2 Perfectly balanced right in the center - no uneven weight distribution to one side. No need for velcro straps, attaches to the goggles with clips on the backside. Clean cable…
LED diffuser ring for Adafruit goggles. Simple ring to diffuse the LED's on the front of Adafruit goggles. The ring is designed to fit over a NeoPixel Ring - 16 x 5050 RGB LED and also fits within the lens cap of the Adafruit goggles. The…
I prefer wearing the goggles with an additional top headstrap, which is what this simple mount tab is for. For me, this increases the wearing comfort significantly. I reused the headstrap of betafpv goggles that I had lying around. I…
!!! READ DESCRIPTION !!! General: This clip has only been tested on my XL model of the Code helmet so I cannot guarantee it will fit on smaller sizes. I recommend trying to print it anyways, STF files are included (normally) My clip is…
This is my Goggles using parts of a Quanum FPV Goggle. The Quanum was not very comfortable to wear and the Fresnel Lens was not well for hyperopia. So I decided to use the LCD screen and headband, exchange the Video Receiver by a…
[FPV] HDZero Goggles Sleeve
There are two different mount versions for printing in TPU and hard plastics (ABS/PETG/PLA etc.). The difference is the cutout on one side of the mount. You can not fit TPU version if it is made of hard plastic because of goggle's…
These inserts let you fit the FatShark-sized/DIY prescription lenses onto the goggles! Lenses should be sized or cut to 24.5 × 17.7 mm. Print with the clips facing up, with support for the lens insert area. Pop the frame over the display.…
This allows you to put custom inserts into the Walksnail Avatar Goggles L. The screws are M1 screws. In the photo, I glued the lenses of my old glasses inside with double sided tape, which works very well for me. Nevertheless, I created…
I made this for my DJI Neo. This case groups the goggle and controllers together so the Neo can be FPV mode-ready, while keeping the Neo itself available in standalone mode. The included print profile enabled fuzzy skin which I found…
DJI Goggles Integra Patent Art Certain images within this model are derived from illustrations featured in the official DJI manual. All rights pertaining to these images are vested in DJI. This endeavor constitutes an unofficial fan…
The bracket for securing the strap of swimming goggles is a small but essential component designed to hold the strap in place, ensuring a snug and adjustable fit. It helps maintain a secure seal between the goggles and the swimmer’s face,…
I designed an easily printable and clean looking mount for putting sharkbyte RX on your orqa goggles. flip it over so the flat part is on the print bed and it will print with no supports, even the holes are designed for no overhang. you…
Goblin gözlüğü. Orjinal gözlüğümü 3D tarayıcı ile taradım. Kapaklar ve gözler arası kordonu sıfırdan tasarladım. İsmimi anmak istemeyen olursa diye “GOBLINWORKS” yazmayan bir çerçeve de ekledim. PETG, ABS ile yazdırmanızı öneririm ama PLA…
I modeled the buckle exactly like the original 1:1, in case the original buckle breaks. Works with NABAIJI swimming goggles from DECATHLON
Same idea as my version 1, just with a bit more work and a nicer end product. The lens holder part is made twice and will need a slightly larger lens shape cut into the top side, but not through, and a smaller lens shape that does go all…
Pink googles for kids for paw patrol cosplay. About 12 grams of PLA. Print the model 2 times in pink PLA, 0.2 mm layer supports enabled. After stitch some rubber straps to finish the goggles. You can scale the model to fit your kid.…
There are two different mount versions for printing in TPU and hard plastics (ABS/PETG/PLA etc.). The difference is the cutout on one side of the mount. You can not fit TPU version if it is made of hard plastic because of goggle's…
I needed a new holder for a strap by Giro Article goggle. There are no new straps that you can buy, so needed to help myself. I decided to make it more resilient with more pins that hold the strap. The original desing from Giro is really…
A TPU gasket for helping seal the Wiley-X SG-1 glasses against chemical agents such as teargas or pepperspray. The SG1 glasses/goggles are great for ballistic protection for protestors/observers, and are one of the only ballistic glasses…
Replacement nose pads for my safety goggles. Print with as soft TPU as you can get.
Protective Storage Case for Fragile LED Magnifying Glasses (Electronics Repair Goggles) These low‑cost LED magnifying glasses are handy for electronics repair, soldering, inspection, and detailed work—but the frame and head‑mount are…
Rear mounted battery holder for your DJI Goggles V2 No more cumbersome battery in pocket and wire running up to your head Optional plate to prevent it from slipping off, but its pretty tight without it Plate can be screwed without inserts…
A simple tactical helmet that will fit onto a cat's noggin. I have included night vision goggles, a stand, and two versions of the helmet (with and without picatinny rails). It also has slots for a chin strap (but please don't strap this…
360 Go3 Mount for Empire EVS Paintball Mask *EZ Clip accessory required* Easily remove the magnetic base from the EZ clip and attach to this 3d printed base. 3d printed base pressure fits onto the mask/goggles. VideoLink Includes…
!!! READ DESCRIPTION !!! General: This clip has only been tested on my XL model of the Code helmet so I cannot guarantee it will fit on smaller sizes. I recommend trying to print it anyways, STF files are included (normally) My clip is…
Futuristic sci-fi visor goggles for cosplay, costumes, props or display. The model is wearable and designed with a detailed honeycomb visor front. ⚠ Important: Must be scaled to your head size before printing (uniform scaling). ⚠ Supports…
After searching for a while for a better battery solution for the Walksnail Goggles X, I finally found it: the Fat Shark battery case. Originally designed for their own goggles, it makes use of 2 18650 LiIon batteries for power, it…
This is a mount I designed to attach the walksnail ascent VRX to the front rails of my HDZero goggles. It's tested on the V1 of the HDZero Goggles, but should work on the V2 also. The STL contains only one part, you need to mirror it in…
This gasket improves stability by replacing the hinge with a fixed element with added brackets for a soft strap. The current version (V1), was modelled for my face shape so the fit may not be ideal for everyone. I include 4 variations…
Clip-On Ski Goggle Scraper with Bottle Opener – Because Vision Is Optional Yes, it clears snow and ice from your goggles. Very responsible. Gold star. But the real MVP is the built-in bottle opener, always ready to crack a cold one when…
The nose piece hinge broke on this pair of goggles I'd had for years. I designed this replacement in Fusion 360. I made minor changes for ease of printing. I used PLA, but if it breaks again the same way, I will reprint in ABS. Printed at…
This steampunk inventor bust delivers a refined mechanical aesthetic with a strong focus on clean character design. The figure is framed by structured outerwear and layered gear elements across the shoulders and chest, creating a cohesive…
These inserts let you fit the FatShark-sized/DIY prescription lenses onto the goggles! Lenses should be sized or cut to 24.5 × 17.7 mm. Print with the clips facing up, with support for the lens insert area. Pop the frame over the display.…
Swimming goggles case with screw on lid and ventilation holes. I used translucent PETG. Due to contact with water I I recommend PETG.
If you've seen my other work , you know I like providing options for us and our prints. I did the quad tube night vision goggles, but had an ask for binocular versions. Done. Then I said, might as well do a monocular version too! All…
DTQSYS Head Tracker Case for DJI Goggle N3 Printed with petg, 0.15mm layer height, 0.4 nozzle, with supports.
A simple adapter to use standard straps on the Walksnail Goggles-X. I printed the clips in TPU with 100% infill on my Bambu Lab P1S.
I made this lens protection to avoid to damage the lens of the DJI Goggles 3.
Since the protective Kapton tape started to peel after a few times attaching and detaching the module I designed this part to close the back side. I printed it in TPU and pressed it in. You might also want to check out my other models for…
Print it 4 times in TPU and press them in. Depending on your printers calibration you might need to scale it up or down a few percent. You might also want to check out my other models for the HDZero Goggles:…
You might also want to check out my other models for the HDZero Goggles: https://www.printables.com/model/1009854-hdzero-goggle-expansion-module-back-cap https://www.printables.com/model/1013045-hdzero-goggle-expansion-module-clip-hole-cap
Very simple but effective lens caps for the DJI Goggles 3. Each cap clips tightly onto each lens and does the job perfectly. Printed on the Bambulab X1C using TPU 95A but might also work with ABS/PRTG
This is a two part body that alllows the use of the Foxeer Wildfire cover by LordKokosnuss https://www.thingiverse.com/thing:5814297 Download file includes the above cover. It does require the base to be superglued to the main body so…
This allows you to put custom inserts into the Walksnail Avatar Goggles L. The screws are M1 screws. In the photo, I glued the lenses of my old glasses inside with double sided tape, which works very well for me. Nevertheless, I created…
Printed tilted forward 45° with organic support on build plate only and at a 2.8mm layer height. Use M2 screws or e6000 to attach to the front of your Goggles X. The VRX cover uses an iFlightVRX, Runcam Cam Mini DVR, 20x20x6mm 2wire 5v…
Added a 0.2mm layer covering the eye. This is done entirely in Orca slicer. Set top and bottom layers to 0 for the mesh part only, and play with grid infill percentage for desired effect. Reduce sparse infill line width to 0.4mm on a…
A stand to help support the bottom half of the shell without putting strain on the display ribbon cables. Print detail isnt to important on this model, I would do large layer heights and low infill, a modifier can be used fo the upper…
This is Battery pack/holder for FPV goggles. You can mount an additional battery on the goggle strap. This holder is for battery 3S (1450mA) Battery dimension: 13mm x 39mm Print PETG 0.20 with nozzle 0.4 Category: R/C Vehicles
This is a replica of the goggles worn by the engineer from Team Fortress 2. They are not using the actual model files from the game, but instead I have recreated myself in CAD using image reference. However, I tried to optimize them for…
DJI Goggles 3 case. I designed this case to house the goggles with the battery pack flipped and nested on the inside of the goggles. The goggles fit snugly in the case and there's no perceivable movement inside the case when shaken.…
print the model twice. I recommend TPU. If you don't have TPU maybe scale it up by 1% so the tolerances work
With this case you can mount your Uruav V3 module together with an Eachine Pro58 VRX and a Runcam mini DVR for recording your flight footage. Print with PETG or PLA with 0.15 or lower layer height for best results. Supports are only…
I built this to have an easy switchable thing, that I only need when flying analog or headtracking. detachable and without interference the Antennas. Original Headtrack Modul from Caddx Analog modul is Eachine Pro58 DVR Board from: cooeye…
I made a cover for my Walksnail Goggles X True RC patches by LetsflyRC.
Full instructions on how to create your own Minions pumpkin with animated eye on my website. https://johnzanussi.com/posts/minions-pumpkin-animated-eye#part-2-how-to
this one is for use with short cable, therefore no rings to hold long one
Small pocket for laser safety goggles. I have printed it from transparent PETG so you can see whether the pocket is empty or not. Tested with all Thorlabs models - https://www.thorlabs.de/newgrouppage9.cfm?objectgroup_id=762.
If you've struggled to find a comfortable strap for your HDZero goggles, consider this. The strap is a Sunnylife TD78 , and is sold on AliExpress and other markets. The addition of the top strap plus non-elastic straps allows one to shift…
Model on pictures is printed with CPE with 0.2 layer height. Recommended printing: 0.2 layer height
Storage box for diopter lenses. It is designed for inserts used in Fatshark HDO1 goggles.
This particular part of your helmet is particularly likely to damage. After mine was destroyed I designed a replacement based on original one.
Sand the surface that is in contact with the helmet before gluing Print on its side! Filament: ABS Infill: 100%
Winter is coming... there may be snow! But now you are ready. Print these old school inuit goggles to handle all the bad sun rays when in the wild to prevent snow blindness. :-P There are openings to put through a rubberband. The whole…
The original battery (500mah) didnt last long under normal operations, let alone with the DVR mod. So I upgraded! I salvaged some LiPo cells out of an old laptop (3x 1800mah were usable). Soldered on a male plug ends on each. Removed old…
I made this for my DJI Neo. This case groups the goggle and controllers together so the Neo can be FPV mode-ready, while keeping the Neo itself available in standalone mode. The included print profile enabled fuzzy skin which I found…
These are essentially phone VR goggles but designed with a “module bay” for a wifi module for connecting to a phone. I will add more pictures later. Assembled with M2 screws and nuts. Here is what it looks like: Assembly tutorial:
Designed to fit Micro AXII 2 stubby antennas. The Plugs are modelled to the official goggles 3d model. Printing the correct pieces for each side may be necessary, i have faced some weird alignment issues with them. Mine are printed in…
"Don’t anybody move!… I lost my contact lens.” This is the X-Men Cyclops Goggles designed by me for a costume party. They print out nicely in 4 pieces, which I did on my 'Up! Plus 2' 3D printer using the 0.2mm layer thickness. I've added…
lens protector this will protect from any scratches or accidents tpu was used
Upgrade your FPV setup with this custom 2S LiPo battery holder designed specifically for FPV goggles. This model includes two versions to fit your needs: Easy-Slip-On Version : Quickly attach the battery holder without having to remove or…
Just like the title its a SpeedyBee Analog module holder for Walksnail Goggles X. I made it to hold the analog module and the Extension board . Then I used Nils @ Printables base…
Mounting the Goggle X Extension Board on top of the goggles as Caddx suggests makes the extension board really look like an afterthought. I've designed this housing to replace the right (screens facing you) Goggle LED panel. This module…
This is a housing to mount a power switch on the side of the DJI FPV goggles. The switch mounts to the goggles by replacing the mounting screws for the right side strap attachment. It is designed to work with the KCD11 type rocker switch.…
Replacement nose pad for discontinued model of tactical goggles, cannot be bought anymore (even the manufacturer doesn't produce replacement parts) Printed from TPU on low speed, with ultra high quality settings If you need both left and…
Summary: A mount for the Walksnail Goggles X Extension Module. Mounts to the top of the goggles. Uses a two piece design leaving only a low profile mount when not using the module. With the low profile mount it still fits nicely in the…
This model is designed similar to a box I have for an older Speedo goggle model. If you are adventurous you can try print-in-place. The uploaded model is currently separated. Print settings: - Material: PLA - Nozzle: 0.4mm - Layer: 0.2mm…
I loved the triple feed patch's and the way “Layerfab” mounted them on the goggles, but as I understand the best setup for Walksnail is to keep al 4 antennas the same type and dBi. I first smashed together the bracket with the mount in…
Remixed the original design by Knerdler to allow for any generic frame glasses to be mounted with some vertical adjustability. Recommend printing the frame with a black material to reduce internal reflections, I used both PLA and PETG and…
Upgrade your FPV setup with this custom 2S LiPo battery holder designed specifically for FPV goggles. Its cable friendly (inside the battery) and i upgraded it with a cable holder for extra comfort. Both versions are lightweight, sturdy,…
WAIT! Before printing this model, just know that there is now a removable helmet version available. https://www.printables.com/model/1185916-dummy-13-night-vision-helmet-v2-now-removable This is not my model. Just thought i'd post it here…
My analog modules like to pop apart in my bag, so I designed a enclosure that is screwed closed with M3 hardware. The bottom antenna hole is enlarged to support a stubby omni. Files are orientated correctly you will need supports from bed…
original text: “This case groups the goggle and controllers together so the Neo can be FPV mode-ready, while keeping the Neo itself available in standalone mode.” the uploader uploaded a Bambustudio 3mf file which isn't compatible with…
The stock mount designed by PyroDrone is pretty great, but I wanted to update it a little to suite my tastes. This mount is strong, light and utilizes the stock fan cover and screws - just don't tighten too far since there's fewer threads…
Safety goggle holder for Honeycomb Storage Wall. This honestly doesn't work the best, but it's alright. Just a simple modification on the original design. I recommend using CA glue to attach this to the insert.
Assembly: Requires 4x 6mm M3 Screws and the Insta360 Go 3 Hat Clip. Screw the two pieces together around the goggle strap, then attach the Insta360 Go 3 Hat Clip. The chamfer on the flat edge is to help the hat clip jaws open easier.…
I used the popular Eachine PRO58 RX Diversity 40CH receiver for this modification. The goal was to keep the receiver in the goggles functional while having the option to turn on an external receiver if needed. The external receiver…
Cool and easy to print minion goggles to add that missing touch to your despicable me costume. Printable quite without any support simply by placing the frontal face on the bed the only place where I suggest ading supports in on the slits…
Print information: Perimeters: 5 Layer: 0.1 Supports: build plates only.
![[FPV] HDZero Goggles Sleeve](https://media.printables.com/media/prints/1223921/images/9176411_8126a305-9f9d-4740-9b1b-c4e7bdf0775e_1b35714f-702b-401c-ae4e-a76c51ea6e48/img_4930.jpeg)
