Delta-P V2-R2 Rigid Dragon Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified extruder cover. Fixes a Dragon hotend in place for 1-handed nozzle swaps on the stock MK3S+ extruder.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 94
- Wydruki
- 2
- Wyświetlenia
- 701
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Remix of teookie's Delta-P extruder cover that incorporates jmillerfo's design to allow one handed nozzle swaps with the Phaetus / Trianglelabs Dragon hotend on the stock Prusa extruder.
The fantastic matching fan shroud can be downloaded from teookie's Delta-P V2-R2 Model. This also contains the assembly instructions.
Printed in PET-G at 0.2mm layer height, with 4 perimeters and 30% infill. No supports.
The little block holding the hotend in place is printed with 100% infill using a modifier in your slicer. Refer to jmillerfo's design for more detailed printing instructions.
If you enjoy this model, please consider uploading a make - thank you!