1 / 3
"Airassist" for COMGROW CNC ROBO 5W laser
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick and dirty "Airassist" for COMGROW CNC ROBO 5W laser .
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 571
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
Not sure does it really works, but at least it blows the laser smoke away. Any tips and suggestions are welcome. Fits a normal 6mm OD tube. I will add the “angled” air input version later.
Printed with ASA, 40% infill, 4 perimeters but less should be ok too.