Mount for Suunto Dive Compass - Retractor attachment

I've been meaning to convert my dive compass to work with a retractor for a while and after finding the excellent bungee converter by Crazy_Diver_84 here https://www.thingiverse.com/thing:2641327

I decided to make a modified version of it.

I've tightened up the fit as I found it was a little loose, and this also meant I could use TPU as well as PLA for printing.

I also added a section for a strap to go through (25mm webbing). For my use I've attached a stainless steel D ring, but you could use velcro, eyelets or whatever you prefer.

I also did a version with 50mm webbing, but that was too wide to be practical.

I left the bungee holes in place as that allowed for 2 options with a single mount, which you don't get from the commercial versions.

Photo's show it printed in both TPU (orange) and PLA (White), both are a good fit, but right now I'm favouring PLA whilst it's underwater due to the additional stiffness. I may make a further modification to stiffen the walls when using TPU, but this is my personal preference.

Strap was stitched by hand using a speedy stitcher.

Print Settings

Printer Brand:

Anycubic

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

0.2mm

Infill:

Filament: Anycubic TPU / PLA

Notes:

Category: Sport & Outdoors