Mount for Suunto Dive Compass - Retractor attachment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I've been meaning to convert my dive compass to work with a retractor for a while and after finding the excellent…
- Rating
- 4 / 5
- Likes
- 10
- Downloads
- 88
- Makes
- 1
- Views
- 763
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
I've been meaning to convert my dive compass to work with a retractor for a while and after finding the excellent bungee converter by Crazy_Diver_84 here https://www.thingiverse.com/thing:2641327
I decided to make a modified version of it.
I've tightened up the fit as I found it was a little loose, and this also meant I could use TPU as well as PLA for printing.
I also added a section for a strap to go through (25mm webbing). For my use I've attached a stainless steel D ring, but you could use velcro, eyelets or whatever you prefer.
I also did a version with 50mm webbing, but that was too wide to be practical.
I left the bungee holes in place as that allowed for 2 options with a single mount, which you don't get from the commercial versions.
Photo's show it printed in both TPU (orange) and PLA (White), both are a good fit, but right now I'm favouring PLA whilst it's underwater due to the additional stiffness. I may make a further modification to stiffen the walls when using TPU, but this is my personal preference.
Strap was stitched by hand using a speedy stitcher.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm
Infill:
25%
Filament:
Anycubic TPU / PLA
Notes:
TPU needs a little work with a razor blade / craft knife to open up the window due to the supports, but otherwise prints nicely.
Category: Sport & Outdoors