1 / 4
IKEA BEKANT + Tele2 Wifi Hub C2/C3 (Sagemcom)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for Tele2 Wifi Hub C2 and possibly also C3 (not tested) on IKEA Bekant legs. "Sagemcom F@ST 3890V3"
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 740
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
Since the Tele2 Wifi Hub C2 (possibly also C3, not tested) does not have any mounting options, I decided that I would like it on my other “bekant” leg.
Press the ring on the lower part of the leg and move upwards and place where you want it. A wall mount is also provided.
Hardware needed for BEKANT:
- 1x M6*20mm screw (hex, not sure if others fit)
- 1x M6 nut.
Hardware needed for Wall:
- 2-4x countersunk screws, holes are 3,5mm (or 4mm for big), screwhead is max 6,4mm wide (or 8mm for big).
Printed with PLA, 0.2mm speed profile, but can probably be printed in other ways. Print the “ring” with 0% infill and 4 perimeters.