Headrest mount (120-150mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To be able to mount a phone holder to the back of the front seat of my car i've designed this parts.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 563
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
To be able to mount a phone holder to the back of the front seat of my car i've designed this parts. It is compatible with Brodit swivel mount to be able to attach your desired phoneholder.
It is mounted together with two M6 bolts and the phone-holder bracket is mounted with a mushroom head M8 bolt.
As i also needed a pole for a mirror (to look into the maxi-cosi) i've also attached this to the part. I use it as two separate items (one for the phone and one for the mirror) so i've printed with a negative volume block in PrusaSlicer to remove the part that i did not need for that item.
To save printing time i've made the bracket in 0.2mm layer height and the other parts 0.15mm with larger heights at the bottom and top (below and above the holes/pole) as i wanted them to be a bit more detailed.
I also combined the infil with two layers.