Asetek Invicta Brake pedal plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After making the smooth and wider throttle pedal plate I was asked to design the brake one too. I have make the plate…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 361
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
After making the smooth and wider throttle pedal plate I was asked to design the brake one too.
I have make the plate a little thicker to compensate the extra braking pressure
This like the other plate I made would take the M5 countersunk hex bolts and an M5 nut to secure, I would think that 2 bolts would be enough but as per the other model, dependent on how you have mounted the metal plate to the arm depends on what holes will be available.
Print upside down for a smooth face and no need for supports
Printed with a higher infill on the pedal area (50% on gyroid) and then the rest on 15% on gyroid
Category: Other