Liczymy pasujące modele…
requires 4 4mm heat set inserts to mount the 120mm fan and 4 15mm m3 standoffs between the block and the printed part. Longer standoffs would be fine, but 15mm is the minimum. attach the printed part to the standoff with 10mm m3 bolts and…
The Minisforum ITX boards support an unusual hole placing for the cooler mounts, 52mm on the edges. The model by NAnglo uses a slighty wider spacing, therefore I needed to adapt it a little bit. Print with temperature resistant and robust…
Here is my mount for the Lian Li 8.8" Secondary Screen. It is designed to fit the Asetek Front Mount, it is press fit, and the monitor being an all metal design means that the weight of it keeps it in place I have shown the longer version…
requires 4 4mm heat set inserts to mount the 120mm fan and 4 15mm m3 standoffs between the block and the printed part. Longer standoffs would be fine, but 15mm is the minimum. attach the printed part to the standoff with 10mm m3 bolts and…
Allows you to mount the Simagic Haptic reactor on Asetek pedals. First attach the reactor to the bracket and then mount it on the pedal. No extra screws are required for mounting (to install on the pedal, the screws holding the pedal are…
EDIT : add mount for Velocitas Imperium ( to test ) Version bêta, une v1 sortira avec un PCB pour que cela soit plus propre. Vous devez passer le câble dans le mount ou sur la faceplate avant de souder, car une fois soudé, le câble ne…
The handle cushions allow you to adjust the color of your Asetek steering wheel. Material for FDM: TPU (softer is better) Printing settings: Perimeters: 1 Infill: 15% Layer height: 0.15mm Supports: no When putting on a smaller piece,…
I made myself a mount for the base. You can download the quick release mount for the steering wheel here: https://www.printables.com/model/425542
Here is a modded Heelgap-Plate for the Forte S Pedals. If they fit a bit too loose, just use a bit of double sided tape
For allAsetek pedals (la prima/forte/invicta) and with the original bolts between the pedal plate and tapped holes.
I wanted an easy way to mount a phone or ddu to my Asetek La Prima wheelbase. I created this model with a GoPro interface os it remains universal. → You will need 2x M6 45mm allen cap screws. → The hole spacing is 100mm I use an old…
The Minisforum ITX boards support an unusual hole placing for the cooler mounts, 52mm on the edges. The model by NAnglo uses a slighty wider spacing, therefore I needed to adapt it a little bit. Print with temperature resistant and robust…
Adapter for the SIMDID DV480 Dashboard on Asetek Bases. U need 2x M6x50mm to adapt to the new length of the adapter.
Print settings Print wedges, mid section and bottom in ABS at 100% infill with a 5 mm brim. Enable support only on the bottom section where the M6 bolts are countersunk. Print the lever and pin in PETG (100% infill recommended) for a bit…
Creation based on two existing models (Simucube wheel stand and Asetek wall mount)
My Asetek Forte Pedals have an oddly placed USB port. There are two threaded M6 holes near the usb port that are unused on my setup. I made this clip to hold the USB cable securely. The clip will hold a 3.8-4.2mm cable securely. 2x…
I printed this pedal stop pad out of 95A TPU. It slips over the pedal stop screws on my Asetek Forte Pedals to silence them.
This is an adapter plate to mate the Asetek Formula Forte Pro, to other QR adapters for other wheel bases. It's meant to cut down the added shaft length from using all the Asetek adapters, on top of the factory Asetek Mount, on top of the…
Here is my mount for the Lian Li 8.8" Secondary Screen. It is designed to fit the Asetek Front Mount, it is press fit, and the monitor being an all metal design means that the weight of it keeps it in place I have shown the longer version…
There is a AM4/AM5 retention kit for Asetek based AIOs[1], e.g. from ASUS for the ASUS ROG STRIX LC II 120 ARGB, or ASUS ROG Ryuo 120. If used with the Thermal Grizzly AM5 High Performance Heatspreader, the contact pressure will be too…
Asetek Invicta Clutch pedal smooth pedal plate These make the pedals sock friendly or nicer for someone that wants a smooth pedal Uses 2 countersunk bolts (will need to be sourced) and nylock nuts to hold into place. Print upside down so…
Asetek Rumble motors, please see photo as how they fit, 2 bolts and nuts needed to secure to pedal No supports needed, print on flat face Category: Other
This uses the existing top and bottom holes of the pedal plate, if you use these to mount to the arm this will not work for you. Print upside down so that your pedal plate is nice and smooth M5/20mm countersunk hex bolts used and M5…
After making the smooth and wider throttle pedal plate I was asked to design the brake one too. I have make the plate a little thicker to compensate the extra braking pressure This like the other plate I made would take the M5 countersunk…
Asetek Rumble motors, please see photo as how they fit, 4 bolts and nuts needed to secure to pedal. Pedal plates must be mounted one hole higher!!! No supports needed, print on flat face
Are you tired of seeing the exposed wires on your 1000€+ Front mounted Asetek Wheelbase? Me too. So heres a simple Print to cover them up. It is one piece and doesnt need any support. I decided to give them a 90° corner, so that the cable…
I STRONGLY RECOMMEND PRINTING IT LAYING ON ITS SIDE. There it is! For people who dont want to wait anymore. Here is a reverse engineered Version of Aseteks Quick Release for custom wheels. It has very little to no play and is rock solid.…
A Mounting Plate for Asetek Wheels / their type of Quick Releases. The holes are 40mm apart, so that you mount it on a
Edit : ADD mount for ASETEK invicta face plate and mount Edit : ADD for Simucube sport/pro mount, that was a request I don't have a Simucube, print the first two layers, stop printing and test on your base if the holes match (normally it…
Pedal mounts for Xbox style rumble motors onto the Asetek La Prima sim racing pedals. I did not like having the motors exposed as most existing designs have and didn't want to use a clamping method either. My motors have a strip of foam…
add : Mount for Pokornyi Pro Dash EDIT : 1 the parts are functional but I have to adapt the cable passage for the version with the design which is close to the original and the power button (or you have to adapt with a soldering iron to…
Pour changer la couleur de orange vers blanc. A réaliser en TPU J'ai utilisé le varioShore de Color Fabb (natural color) Buse de 0,6mm (faisable sans soucis en 0,4mm) avec 2 perimètres, 2 couches inf et sup et 50% de remplissage.
Print no need for support, print with the motor plate on the bed side i printed @ 100%, but 50% it's okay you have to put the screws in before mounting the motor, unfortunately the crankset spacing is barely smaller than the motor Step 1:…
This is a Dash Pro mount that will fit onto Asetek Wheel base LA Prima, Forte or Invicta. I will upload an additional Version that has no holes for dash so you can use any Dash you want. I recommend printing this out of PLA for rigidity.…
Remix of the model created by PierceRylee1969! Send him your thanks, he rocked it with this one! NOTE: You will need (4) m6 x 25mm screws. (About 10mm longer than OEM)
I Printed it in PETG 0.2mm but I recon go 0.3mm. No Supports needed Very Sturdy. Use cableties to mount the PSU to the holder.
Button for Asetek streering wheel. Full replacement for standard (grey and orange) buttons. Possibility of printing with an FDM printer or using RESIN printer. For printing, turn the model upside down and print on the supports. To install…
Dashboard holder to attach to the Asetek Front Mount, instead of screwing into the base itself. I was told by the manufacturer that tampering with the screws from the Asetek base could damage the warranty, so I decided to mount the…
Project: https://simracing-pc.de/en/2023/08/08/diy-project-tactile-feedback-abs-effect-for-simracing-pedals/ Web: https://simracing-pc.de Discord: https://discord.gg/V5ZKUj3weJ Print Settings Printer Brand: Anycubic Printer: Vyper…
You will need a very flexible filament for the smaller replacement part if you do not want to cut it to fit. Web: https://simracing-pc.de Discord: https://discord.gg/V5ZKUj3weJ Print Settings Rafts: No Supports: No **Resolution:** 0.16…
Just replace the existing screws with M6x50 screws to mount the dashboad on the wheelbase. Web: https://simracing-pc.de Discord: https://discord.gg/V5ZKUj3weJ Print Settings Printer Brand: Anycubic Printer: Vyper **Rafts:** No Supports:…
Project: https://simracing-pc.de/en/2022/06/20/diy-project-alternative-pedal-plates-for-the-asetek-invicta-pedals/ Discord: https://discord.gg/V5ZKUj3weJ Print Settings Printer: Anycubic Vyper Rafts: No **Supports:** No Resolution: 0.16…
Project: https://simracing-pc.de/en/2022/06/13/diy-project-new-end-stop-for-the-asetek-invicta-pedals/ Discord: https://discord.gg/V5ZKUj3weJ Print Settings Printer: Anycubic Vyper Rafts: No **Resolution:** 0.16 Infill: 30 **Filament:**…
Project : https://simracing-pc.de/en/2024/08/02/diy-project-vocore-3-4-inch-screen-dashboard/ Web : https://simracing-pc.de Discord : https://discord.gg/V5ZKUj3weJ With the 3.4-inch display from VoCore, which has been available for a few…
Project : https://simracing-pc.de/en/2024/08/16/diy-project-vocore-4-inch-screen-dashboard/ Web : https://simracing-pc.de Discord : https://discord.gg/V5ZKUj3weJ A small DIY project centred around the 4 inch VoCore display, consisting of…
