Asetek Pagani Huayra R Pedal - SIMAGIC P-HPR Haptic pedals Support adapta
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a simple support for the Asetek Pagani Huayra R crankset
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 98
- Wydruki
- 0
- Wyświetlenia
- 962
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print no need for support, print with the motor plate on the bed side
i printed @ 100%, but 50% it's okay
you have to put the screws in before mounting the motor, unfortunately the crankset spacing is barely smaller than the motor
Step 1: put the screws in the 3D support M6x35 at the top and M6x50 at the bottom
Step 2: mounted the haptic motor on the support in 3d
Step 4: take the allen key corresponding to your screw head, place it already at the level of the head, also take the pedal plate place them on the pedal bracket and screw it
PS: screw in stages once at the top, once at the bottom, not all at once at the top and then the bottom (this is because of the angle limit of the allen key.
PS1: you can hold it with just one screw, it holds very strong!!!
PS2: you can mount the motor afterwards, but it is more tedious because of the shape of the pedal plates which prevents you from using an allen key, so you need to use a bit to screw in and finish with a key .
