1 / 2
Greg's Wade's Accessible Extruder with 5mm output gear axle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of Tick007's GWAE to eliminate the need for the 'M8_nut_adapter' This thing includes only the body and…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 347
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of Tick007's GWAE to eliminate the need for the 'M8_nut_adapter'
This thing includes only the body and the large gear, get the other parts from the original thing.
The body needs two 625 bearings and the gear has a pocket for an M5 screw with hexagonal head (8mm key). Use a long M5 screw (e.g. 50 mm or longer) with unthreaded part between the head and threads and file a flat spot for the drive gear retaining screw.
Category: 3D Printer Extruders