Horizontal mount for Greg's Wade's accessible extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bracket to mount the Greg's Wade's accessible extruder horizontally. This was designed primarily for…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a bracket to mount the Greg's Wade's accessible extruder horizontally. This was designed primarily for mounting to inside of a delta printer top triangle with 2020 profile.
It has screw holes to fix it from two sides (top and side) of the profile for improved stability.
Works at least with this version of the GWAE: https://www.thingiverse.com/thing:1596809
Print Settings
Printer:
Kossel XL
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
Doesn't matter
Infill:
25% at minimum
Notes:
Correct printing orientation is with the largest area touching the build surface (90 degree rotated from the Thingiview preview).
Drill the profile mounting holes to accommodate M4 screws and extruder mount holes to accommodate M5 screws.
Category: 3D Printer Parts