Dish Wand Refillable Soap Scrubber Holder for Kitchen Sink
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made these holders for our dish scrubbers at our apartment Note - the refillable soap one will only work with the…
- Ocena
- 5 / 5
- Polubienia
- 101
- Pobrania
- 336
- Wydruki
- 3
- Wyświetlenia
- 2494
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
I made these holders for our dish scrubbers at our apartment
Note - the refillable soap one will only work with the replacement sponge heads, for some reason those are totally different than the first head that comes with the scrubber.
Attach the parts using double sided tape to the sink. I used the gray 3M type, you could also probably use the foam tape as well.
Print at 0.2mm layer height for a good appearance, I used the PrusaSlicer "adaptive layer height" feature on the small one. The larger one needs to be printed with supports under the arms as shown in one of the pictures
Category: Kitchen & Dining