2.5D IKEA POKAL drinking glass
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a quite faithful reproduction of an IKEA design. Article Nr. 102.704.78 Low resolution photo of the glass…
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 250
- Wydruki
- 4
- Wyświetlenia
- 714
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This is a quite faithful reproduction of an IKEA design. Article Nr. 102.704.78 Low resolution photo of the glass taken from ikea.com (not from a 3D printed object ...)
I did not expect that it is possible to achieve this level of detail without resorting to a proper 3D-modelling tool, but it was quite easy and fun to tinker with the SVG properties for the openSCAD interpreter until everything fell into place so nicely.
Should have used a ruler to get the exact dimensions. Silly me. It came out a bit too stout.
For other objects done with https://github.com/fablabnbg/inkscape-paths2openscad/releases check out https://www.thingiverse.com/tag:inkscape-3D
Category: Kitchen & Dining