1 / 3
Wheels, wheels2car, hub & car link (connect AF cars) — zdjęcie 1
1 / 3

Wheels, wheels2car, hub & car link (connect AF cars)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,07 € – 0,09 € netto (bez VAT)

Dla pliku: HubCap.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,08 € netto (środek widełek).

Masa podana przez autora
1 g
Czas druku podany przez autora
4,8 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

All the information to print and assemble your own base for American Flyer cars

Ocena
0 / 5
Polubienia
3
Pobrania
13
Wydruki
0
Wyświetlenia
195
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

The parts needed to connect the wheels to the car frame, including the car to car connector. Also has wheel caps (two tone) to secure the axle in place.

Need support for the wheel2car for the wheel assembly. May require some drilling (1/16") for wheels and connector. The size of the center hole will be dependent on material used to connect wheel2car to car bed. I found 3mm heatsink worked great. (used to connect, but did not heat) Brim may be helpful, especially for wheel caps.

Use 44mm nail braids to mount the wheels. Once mounted, use glue to position wheels in place. Recommend using a section of S gauge track. Add the wheel caps.

Use a ¾" braid for the connector, secure with a dab of glue. let dry

 

Tagi