1 / 3
Wheels, wheels2car, hub & car link (connect AF cars) — image 1
1 / 3

Wheels, wheels2car, hub & car link (connect AF cars)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

All the information to print and assemble your own base for American Flyer cars

Rating
0 / 5
Likes
3
Downloads
13
Makes
0
Views
195
Reviews
0

Updated at source:

Model information

Category
Vehicles
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

The parts needed to connect the wheels to the car frame, including the car to car connector. Also has wheel caps (two tone) to secure the axle in place.

Need support for the wheel2car for the wheel assembly. May require some drilling (1/16") for wheels and connector. The size of the center hole will be dependent on material used to connect wheel2car to car bed. I found 3mm heatsink worked great. (used to connect, but did not heat) Brim may be helpful, especially for wheel caps.

Use 44mm nail braids to mount the wheels. Once mounted, use glue to position wheels in place. Recommend using a section of S gauge track. Add the wheel caps.

Use a ¾" braid for the connector, secure with a dab of glue. let dry

 

Tags