Taito Vewlix Brook UFB & JVS-PAC2 Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts to fit 2x Brook UFB PCBs and one JVS-PAC2 to a Taito Vewlix arcade cabinet
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 95
- Wydruki
- 1
- Wyświetlenia
- 992
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Mounts to fit 2x Brook UFB PCBs and one JVS-PAC2 to a Taito Vewlix arcade cabinet.
Vewlix_Fast_IO_Brook_UFB_Mount_V3.stl fits the K91X1204A Taito FAST IO.
Vewlix_JVS_IO_Brook_UFB_Mount_V2.stl fits the K91X1097B Taito JVS IO.
JVS-PAC_Riser.stl can be used to raise the height of a JVS-PAC2.
Holes modelled to fit M3 threaded inserts.
Use M3x8mm bolts to fit Brook UFBs to the mounts.
Use M3x25mm bolts to fit mounts to IO tray.
NOTE: If you use the JVS-PAC Riser along side a sub panel you may find that the buttons in your sub panel will foul. For an alternative JVS-PAC2 mount see this model: https://www.printables.com/model/222119-taito-vewlix-jvs-pac2-mount
Update: I've added a Vewlix_Brook_UFB_Standoff.stl model to the project. They can be printed and used instead of typical purchased spacers/standoffs if required.