Taito Vewlix Brook UFB & JVS-PAC2 Mounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounts to fit 2x Brook UFB PCBs and one JVS-PAC2 to a Taito Vewlix arcade cabinet
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 95
- Makes
- 1
- Views
- 992
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
Mounts to fit 2x Brook UFB PCBs and one JVS-PAC2 to a Taito Vewlix arcade cabinet.
Vewlix_Fast_IO_Brook_UFB_Mount_V3.stl fits the K91X1204A Taito FAST IO.
Vewlix_JVS_IO_Brook_UFB_Mount_V2.stl fits the K91X1097B Taito JVS IO.
JVS-PAC_Riser.stl can be used to raise the height of a JVS-PAC2.
Holes modelled to fit M3 threaded inserts.
Use M3x8mm bolts to fit Brook UFBs to the mounts.
Use M3x25mm bolts to fit mounts to IO tray.
NOTE: If you use the JVS-PAC Riser along side a sub panel you may find that the buttons in your sub panel will foul. For an alternative JVS-PAC2 mount see this model: https://www.printables.com/model/222119-taito-vewlix-jvs-pac2-mount
Update: I've added a Vewlix_Brook_UFB_Standoff.stl model to the project. They can be printed and used instead of typical purchased spacers/standoffs if required.