Sphere Candle Mold with integrated funnel and wick holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With this mold you can easily make your own sphere shaped candles.
- Ocena
- 5 / 5
- Polubienia
- 182
- Pobrania
- 784
- Wydruki
- 6
- Wyświetlenia
- 4457
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
This is my first model and it worked out quite nicely. The candle will have 76mm diameter.
You will need 4 bolts, atleast 100mm long. I am using 10mm bolds 100mm long. UPDATE: Apparently just strong rubber bands are enough.
I printed it with eSun PLA+ and it whitstood the candle wax heat good. Before making the candle I applied some grease on the inner walls. Then I waited until the wax was about 60°C and poured it in. When the wax has cooled inside the mold you may need to pour some more wax on top.
If I ever need to make another one, I will add some slots to the sides where I can pry it open more easily with screwdriver. …or you can print this remix from Biffiest: https://www.printables.com/model/222786-sphere-candle-mold-with-opening-tabs-remix