Sphere Candle Mold with integrated funnel and wick holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
With this mold you can easily make your own sphere shaped candles.
- Rating
- 5 / 5
- Likes
- 182
- Downloads
- 784
- Makes
- 6
- Views
- 4,457
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
This is my first model and it worked out quite nicely. The candle will have 76mm diameter.
You will need 4 bolts, atleast 100mm long. I am using 10mm bolds 100mm long. UPDATE: Apparently just strong rubber bands are enough.
I printed it with eSun PLA+ and it whitstood the candle wax heat good. Before making the candle I applied some grease on the inner walls. Then I waited until the wax was about 60°C and poured it in. When the wax has cooled inside the mold you may need to pour some more wax on top.
If I ever need to make another one, I will add some slots to the sides where I can pry it open more easily with screwdriver. …or you can print this remix from Biffiest: https://www.printables.com/model/222786-sphere-candle-mold-with-opening-tabs-remix