1 / 3
Voron 2.4 300x300 panels and removable door — zdjęcie 1
1 / 3

Voron 2.4 300x300 panels and removable door

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Its panels for a Voron 2.4 that make the side and top panels integrated in a frame and a removable door.

Ocena
5 / 5
Polubienia
48
Pobrania
206
Wydruki
1
Wyświetlenia
4960
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

I got tired of the panelclips on the original 3mm acrylic panels, the foam glided down and the panels was moving towards gantry so it got scraped. Made a printable frame in 16 pieces to acomondate foam and hold the panel tight against the frame. The distance from the extrusions is now 6mm and easier to remove since its one piece. The upside is that the frames eaven insolate the extrusions so heating is faster and more eaven. Its made for 4mm panels so if u have the original panels u can use them with foam on both sides.

Backpack is made for a 60x60mm bom fan without any filter (i run nevermore so no need for filtering when exhausting air)

Print settings: 0,2layer, 5top/bottom, 4walls, 40% grid infill, no supports.

 

Bom

Side and top panel(for each panel):

40 heatinserts M3x5x4

40 M3x8 countersunk

16 M5x18 Bhcs

16 M5 rollin T-nut

5x2mm Foam (around 2meter)

Superglue to glue the outer frameparts together

 

Door:

52 heatinserts M3x5x4

40 M3x8 countersunk

16 M5x12 Bhcs

16 M5 rollin T-nut

5x2mm Foam (around 2meter)

10x1mm Foam (around 2meter)

6 M3x6 shcs

4 M3x12 shcs

2 M3x8 shcs

3 5x39mm pins

66 6x3 magnets (round 6mm diameter and 3mm height)

Superglue to glue the outer frameparts together

 

Backpac(exhaust)(this replaces 1 top middle part from the side frames):

18 heatinserts M3x5x4

12 M3x30

10x1mm Foam to seal between each part

M10 pneumatic/bowden coupler

*edit 230504 uploaded step file for the door.

Tagi