Modified Voron decontaminator brush holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modified brush holder for Decontaminator_Purge_Bucket_&_Nozzle_Scrubber
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 173
- Wydruki
- 2
- Wyświetlenia
- 1857
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This is a quick remix of the excellent mod on voron github: https://github.com/VoronDesign/VoronUsers/tree/master/abandoned_mods/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber
individual_sheetstop_v1.8_v2.4_rev4.stl and brush_holder_sheet_stop_rev4.stl
I only added some more mass and added some heatinserts so i can use M3 instead of M2 as sheetstop. I also added a silicone brush when i was at it but the size of the holder is original.
Printsettings: 0,2 layer, 5 top/bottom, 4 walls, 40% grid infill, no supports (small piece is printed on its side) Recomended to print in PC cause it touches the heatbed.
BOM
3 M3x5x4 heatinserts
3 M3 that fits your bedheight with magnet and pei