Ender 3 Dual 5015 dragonfly or mk8
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of dadul96's ender 3 5015 duct to use dual 5015 blowers
- Ocena
- 4 / 5
- Polubienia
- 14
- Pobrania
- 99
- Wydruki
- 1
- Wyświetlenia
- 965
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Liked the look of dadul96'sduct but wanted to run dual fans so cut it in half and mirrored it, also plugged some unused holes, changed the shape to fit around a dragonfly and changed the hole sizes to suit m3 screws too. Works well enough, you can just stick an m3 nut on the other side if wanted.
Attached a crude BLTouch mount, it works okay but not great. Hopefully, someone can design something better or maybe I'll find time to redesign it. If you do use it check that the machine will home okay in x, mine is very close. Depending on nozzle height you may also need to space the sensor using washers. Offsets should be X-50 Y-8.29
Print as per the original file supports touching build surface only. Would recommend printing in ABS or maybe PETG.
- Update 11/06/2022 - added model where I have undone some changes allowing it to fit the original mk8 hot end