OpenTrons 2 (OT-2) - Ice Base Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a very simplistic cooled rack for the OpenTrons OT-2. Fill it (loosely) with ice up to the edge, which holds…
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 89
- Wydruki
- 1
- Wyświetlenia
- 521
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a very simplistic cooled rack for the OpenTrons OT-2.
Fill it (loosely) with ice up to the edge, which holds the rack.
The tubes should push into the ice easily and stay cooled for some time.
Since the model turned to a complete disaster, editing the .step file might be tricky. But if you want to have an easier to print version (less steep overhangs -> see print settings for suggestions) or a version with more volume, feel free to shoot me a text, and I'll try to provide you with your needs! :)
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
15
Filament:
DasFilament Refills (: PLA
Notes:
Printed in 0.2 mm without any supports or increased extrusion multiplier, but turned out waterproof. To avoid the ugly print (see my pictures) you might want to decrease layer height between 25 and 45 mm (in PrusaSlicer: right click on the object -> height range Modifier).
Category: Machine Tools