8 modeli
This is a very simplistic cooled rack for the OpenTrons OT-2. Fill it (loosely) with ice up to the edge, which holds the rack. The tubes should push into the ice easily and stay cooled for some time. Since the model turned to a complete…
Cryovial tube rack for the Opentrons OT-2. Designed and manufactured for the Sather Lab of Seattle Children's Research Institute. Tubes are at a 20deg angle to enable capillary action to draw the fluid out of the pipette tip to ensure all…
This is a servo-operated gripper intended for picking up and putting down petri dishes using the OpenTrons, which is a reprap-like open source liquid handling robot. This gripper is designed to be low profile to fit on the robot, and also…
Adapter plate and stand for using 1.5mL snapcap microcentrifuge tubes with the Opentrons Magnetic Module gen 2. This was designed because our laboratory wanted to automate some protocols that use magnetic beads, but not at a 96 well plate…
Lose your config block? Here's an easy model to print and configure your opentrons OT-2. This is used to configure the z axis of the ot2 pipettes. Infil: 5% PLA or PetG
Fixes a crack in the plastic pipette carriage. Printed in Overture PC. Friction fit. Bracket braces by slotting over the T joints marked in blue on the picture.
Fits the Opentrons OT-2 P300M Gen2, 8-channel pipette. Replacement for the carriage - the part that drives the plungers and tip ejector. Requires no additional hardware. Print Settings Tested using a 0.4 mm nozzle at 0.2 mm layer height.…
Opentrons OT-2 Top Window Hold Down Clip Disclaimer I do work for Opentrons. But this is not an officialy approved solution. Just allowed me to keep testing the robot. Description The sensor on my OT-2, that detects if the top window is…
