Opentrons OT-2 P300 8-Channel Gen2 Replacement Carriage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement carriage (part that drives the plungers & ejector) for the Opentrons OT-2 P300M Gen2 8-channel pipette.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
Fits the Opentrons OT-2 P300M Gen2, 8-channel pipette.
Replacement for the carriage - the part that drives the plungers and tip ejector. Requires no additional hardware.
Print Settings
Tested using a 0.4 mm nozzle at 0.2 mm layer height.
General settings for strength: 4-5 perimeters, 40% infill, ≥1 mm top/bottom.
May require build plate supports in the area highlighted below:

Motivation
Our pipette stop aspirating/dispensing all of a sudden. I was surprised to find that the carriage had actually broken in half at the linear rail mounting holes:

The cross section of this part at this location looks to be insufficient for the repeated stress of “de-sticking” the pistons over time, and the other set of mounting holes also showed hairline cracks forming.
