Opentrons OT-2 P300 8-Channel Gen2 Replacement Carriage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement carriage (part that drives the plungers & ejector) for the Opentrons OT-2 P300M Gen2 8-channel pipette.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 122
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
Fits the Opentrons OT-2 P300M Gen2, 8-channel pipette.
Replacement for the carriage - the part that drives the plungers and tip ejector. Requires no additional hardware.
Print Settings
Tested using a 0.4 mm nozzle at 0.2 mm layer height.
General settings for strength: 4-5 perimeters, 40% infill, ≥1 mm top/bottom.
May require build plate supports in the area highlighted below:

Motivation
Our pipette stop aspirating/dispensing all of a sudden. I was surprised to find that the carriage had actually broken in half at the linear rail mounting holes:

The cross section of this part at this location looks to be insufficient for the repeated stress of “de-sticking” the pistons over time, and the other set of mounting holes also showed hairline cracks forming.
