160 models
Manufacturing procedure: Material: PETG 3D Printer: FDM 3D printer, average print time 3-8 hours, depending on size Slicer settings: 5 perimeters, 0.2mm layer height, print horizontally, use brim Post processing instructions: Clean the…
Print approx. €10.84–€13.24 excl. taxPreliminary estimate for PETGSource material: PET
I used a M2*8 set nut with an 8mm M2 screw to attach the lid. There is also space to insert 2mm diameter x 1mm deep magnets in the lid to help it stay clipped closed. Print the tip holder required and place in the case. There are holders…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
This simple insert turns your Axygen pipette tip boxes in to sample boxes using a handy insert for 0.6mL centrifuge tubes. Or you can just use as a stand alone rack. We use these to more securely store our samples in the fridge and…
Print approx. €2.02–€2.47 excl. taxPreliminary estimate for one variant
Spent a bunch of time, threw out a few designs as false starts and finally ended up with a model that works! These are 5mL eyedroppers printed in PETG with graduation marks every 1mL. I actually think they look kinda cool, which is not…
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for PETGSource material: PET
Unleash the functionality and convenience of 3D printing with our free, custom-designed micropipette holder featuring integrated magnetic inserts. This holder comfortably accommodates 4 magnets of 6x3mm each, ensuring your micropipettes…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for PETGSource material: PET
Prevent the tip holders breaking from drops with this gaurd
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
In chemistry, you are often using a pipette only once because you don't know what chemical was in there before. You can attach this print with a simple cable tie to your chemical and you can always be sure that the pipette is matched with…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
This rack is designed for 100 1000 µl/1 ml pipette tips or 200µl tips that drop in fully and has a height of 5 cm.
Print approx. €2.21–€2.70 excl. taxPreliminary estimate for one variant
Manufacturing instructions Material: PETG/PP 3D Printer: Any FDM 3D printer with the minimal build plate size 200x200mm Slicer settings: 4 perimeters to increase strength, support recommended– for stability Post processing instructions:…
Print approx. €4.30–€5.25 excl. taxPreliminary estimate for PETGSource material: PET
ProPipette conversion kits available The three models currently available are: Kit for 10ml luer slip syringe . 3D printable parts: - Universal spout printed in TPU (This spout works for all luer slip type syringes). - Printed TPU plug…
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant
The analysis of catalytic properties for heterogeneous catalysis requires many small-scale experiments. Catalyst activity is often rated by the turn-over. The turn-over is determined by gas chromatography (GC). For this purpose, the…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant
I designed these inlets to fit glass slides into standard pipette tip boxes, perfect for wet chambers or storage. Compatible with: TipOne brand boxes Slide size: 22 × 50 mm These inlets keep your slides secure, greatly reducing the risk…
Print approx. €3.08–€3.76 excl. taxPreliminary estimate for one variant
This rack is designed for 100 1000 µl/1 ml pipette tips that drop in fully.
Print approx. €4.04–€4.94 excl. taxPreliminary estimate for one variant
Building on the first model, I wanted to rethink the design to participate to the " last meters" contest. I started by trying to reduce the volume of the model. First by cut-out (yellow model) and by redesign with thinner walls (green…
Print approx. €0.36–€0.43 excl. taxPreliminary estimate for one variant
This small modification just embeds magnets in an already good design. This will decrease your holder's strength of attachment to the wall but removes the danger of pulling out the magnets if they are improperly glued into the model. If…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
The 'Elster' Pipette Tip Sorting Device is a clever 3d printed tool designed to quickly sort and transfer 200 µL pipette tips into a storage box, eliminating the laborious task of manually sorting pipette tips. We re-share this device…
The design idea started with the need for a glass with a straw that my son would like. Then I wanted to increase the varieties that children would like. While I was designing varieties, I felt like I needed an iced coffee so I designed…
This was migrated from my Thingiverse profile and is from 2016. Also have a look at my remixes of this with a gecko and T-rex: https://www.printables.com/model/432454-finnair-displacement-pipette-holder-with-t-rex-hea and…
Pipette Holders This modular holder was made to be able to resist the seismic conditions of Chile and is an easy-to-use holder for pipettes in general. We have designed multiple versions, all of them available here, to adapt the holder to…
A modular stand for inexpensive, generic micropipettes. I had to glue the left leg to the first holder, as it wasn't as snug as I wanted, but that's just due to the print orientation of the legs. The rest of the “blocks” holds perfectly…
Modular pipette tip sorter for P10, P20-P200 and P1000 SARSTEDT tips. Tested tip boxes: P10: Axygen Biosphere Fisherbrand VWR P20-P200: Biosphere Fisherbrand SARSTEDT VWR P1000: Biosphere
A little holder I designed for Tamiya thinner or airbrush cleaner bottles. Can be easily printed without supports. Grips in to the indent on the sides of the bottle. Simple, but very convenient :)
The prevailing trend among science laboratory equipment manufacturers and brands involves creating tools and stands exclusively tailored to their own products, fostering a monopolistic environment within the market. However, this practice…
The original link to parametric files no longer appears to be working. Created parametric models for editing.
If you don't want to use heat set inserts , I've also created a modular design, available on my profile, where you just have to press the holders together to expand. After making a wall mount for inexpensive, generic micropipettes, I…
This is a rotating pipette holder/stand with (or without) surrounding DNA helix and with (or without) your own logo. It has many customizable parameters and can be adapted for various pipette types. Materials (BOM) 1 x deep groove ball…
We use these holders anywhere where horizontal space for pipette stands is limited, in small rooms, inside flow benches etc. (Or when are in ship-board labs foir marine research where classic pipette stands tend to fall over regularly,…
Single pipette holder. Fits most models including Gilson Pipetman, Rainin, and similar models. I recommend using 3M VHB adhesive tape, 0.4 inch width, for mounting. Like my work? Help keep it free: buymeacoffee.com/danmanmd
I wanted the same great idea by Jonas but for the Mr Hobby 400 ml bottles of thinner.
Tubing cutter, specifically designed to cut small plastic tubes or straws. The sharp blade allows for clean and precise cuts, which is essential for ensuring proper fit and functionality in applications such as microfluidic tubing,…
The pipette holder was designed to mount pipettes inside a Laminar flow hood but can be mounted to any surface. To mount the holder, we used tesa POWERBOND .
Printing instructions This model is intended to be printed supportless, be sure to properly orientate models before printing. To achieve this, rotate tip and body upside down in your slicer . In case you have bed adhesion problems, using…
About This is a simple functional stand for burretes and pipets with drain train for any laboratory. Its very easy to print and assemble. Expense Part Filament Time Tray 106g 3h23min Drain tray 117g 4h Connector 62g 2h26min Net 40g…
Serological Pipette Holder A holder for serological pipettes that protects and organizes both glass and plastic pipettes. Features • Lightweight Design : Reduces the consumption of plastic. • Modular Design : Stackable modules for…
When i use my airbrush i always have a struggle where to pu my pipette so i designed this small holder . the remaining paint can drip out into the mixing cup. if you make one, please upload a picture. i would like that very much.
This model is a holder for 3ml disposable pipettes. I use it to hold my pipettes when dealing with multiple small vials. The design is meant to ensure that the tip of the pipette is not contaminated by anything, that there is no risk of…
I printed this model with the default settings 0.2mm SPEED on Prusa slicer, PLA, no supports needed. I used insertets where necessary. I used 8 M3 inserts for the standing version and and M3 L8 screws.
Custom pipette holder for UW Biology lab space, with a clip for the metal bar and space to glue a magnet for additional stability. Works for standard Gilson pipettes (all sizes). Additional model has slightly wider prongs to allow for a…
The two parts for the 2.5uL ejector can be assembled in your slicer by importing one as a “part” of the other. The ejector model can likely be modified to fit the 10uL Research Plus pipettes by removing some of the “middle” section of the…
I made a cut away version of my generic micropipette wall mount, to properly fit a shelf or an edge. The screw hole is moved up to line up with a shelf edge on thinner shelves, if you don't want to use double sided tape (which absolutely…
Lab technicians know these eppendorf pipette pens are part of the S tier of science swag. Recently, I was gifted one and HAD to make a matching pen holder! This is going at my station (next to my p100 and p1000) in my lab and will see…
Simple stand for 3 mechanical pipettes. Fits Microliter pipettes Witopet from Witeg. This was used as a sample model for Prusament PP Glass Fiber . Read more about the material in our announcement article:…
This is a rack for eppies designed specifically to work with Integra Multichannel Pipettes ( https://www.integra-biosciences.com/canada/en/multichannel-pipettes-or-multichannel-micropipettes ) This rack has exactly 13.5 mm in between each…
The fantastic T. rex pipette holder from @bart187851 ( https://www.printables.com/de/model/432454-finnair-displacement-pipette-holder-with-t-rex-hea ) inspired me to remix different models with his pipette holder. I hope you like my remix…
Works for pipettes that have a hook on the end. Can hold up to 6 and can rotate by twisting the knob at the top. All parts can be printed with no supports at 15% infill. Parts fit together with square connectors, make sure they are…
Rotating stand for Eppendorf style micropipettes. Room for six. All parts are threaded for assembly. Bottom ring should be tightened to stop the shaft from wobbling but still allow the carousel to spin. Washers could also be added (20mm).…
10ml Pipette Tip Storage and Dispenser is designed with convenience and professionalism in mind. Featuring a rotating knob on the right side, effortlessly retrieve your pipette tips with a simple twist. No more fumbling or searching…
drucken mit TPU (Gummi) hochgeladen am 10.03.2024
I modified the arms with rounded edges to reduce the risk of scratching pipettes or your hands.
Just a taller pole to accommodate my pipettes!
Sliding shelf pipette holder designed to maximize the use of existing shelf space. Easily slides into position without tools, allowing flexible placement based on your setup. Keeps pipettes organized, accessible, and off the main work…
Can be just stuck together or optionally glued for better stability.
Pipette holder, works for the same models of pipette as the original ( https://www.printables.com/model/291503-finn-pipetteadjustable-air-displacement-pipette-ho ) but with added gecko ( https://www.thingiverse.com/thing:783748 ).…
Parametric tip “rake” for transferring a column of tips between partially used boxes. The uploaded model is sized for Tecan 200uL tips so you may have to adjust the distance between the prongs to work well with your tips. Print with…
Pipette holder. Works for the same types of pipette as the original ( https://www.printables.com/model/291503-finn-pipetteadjustable-air-displacement-pipette-ho ) but with added T-rex head/arms ( https://www.thingiverse.com/thing:2306188…
You only need minimal support on the bridges. I printed it in PETG, came out stable and works nice.
When storing your classic pipettes it always comes quite shocking when you see how much a simple pipette stand will cost you. So the answer is quite easy, just print it yourself. This stand consists of three parts, each prints without…
This is a micropipette holder that can clamp onto a bench top or table surface. The clamp base is intended to receive M3 heat-set inserts, and the pipette holder attachment has holes to affix it to the clamp with M3 socket head screws.…
This is a revision to the stand provided in the original design. I broke it up into parts so it can be printer on the average printer. Everything threads together and I used a ¼-20 threaded rod down the center of the entire print for…
All our P20s were missing the ejector piece so I designed a replacement. May work for other pipette brands or sizes with some tweaks, reach out! Printed in black PLA and PETG, printed from the bottom up with support on the “shelf” area…
I designed this Socorex ACURA 825 Micropipette holder for our drybox in the Lab. The holder attaches to the metal shelves in our box, and are held in place additionally via two 10x2 mm disc magnets that is glued in. Excuse the terrible…
When "Ultimate" just doesn't cut it anymore, enter the... De-Luxe Eppendorf pipette holder Height-and-tilt adjustable Eppendorf pipette holder for wall or under-the-shelf mount. The patent-pending™ Quick-Draw© holster allows to insert and…
This model is a type of micropipette based on single use Pasteur pipettes. I use it to drop small, controlled amounts of silver ink on electronic samples. You can use the control screws to handle repeatable amounts of liquid or use the…
The fantastic T. rex pipette holder from @bart187851 ( https://www.printables.com/de/model/432454-finnair-displacement-pipette-holder-with-t-rex-hea ) inspired me to remix different models with his pipette holder. Sadly, I have only six…
Handle extender and thumb grips for elm-plastic Dosing pipettes. Works for 5ml variety (only one I have to test with), may work for other sizes, but cannot guarentee. Assists in drawing up and dispensing liquid medications.
Polysher Pipette Holder for the polymaker polysher
The fantastic T. rex pipette holder from @bart187851 ( https://www.printables.com/de/model/432454-finnair-displacement-pipette-holder-with-t-rex-hea ) inspired me to remix different models with his pipette holder. Sadly, I have only six…
Colored rings that snap onto gilson pipets and help in identification of volume.
I made a pipette holder for my girlfriends HESI Houseplants Elixir Bottles. (Small Leaf Design) It's an easy, supportless print, made with generic PLA. 30mm diameter for big bottles, 25mm diameter for small bottles.
The fantastic T. rex pipette holder from @bart187851 ( https://www.printables.com/de/model/432454-finnair-displacement-pipette-holder-with-t-rex-hea ) inspired me to remix different models with his pipette holder. Sadly, I have only six…
Print on its side for less material waste and shorter print time (see second photo for reference).
Hi there, In my brewery at home I use 10ml pipettes for various things. Since they're made of glass I wanted a save place to put them where the could also dry, so i made this to attach to my Ikea Skadis wall organizer. Big thanks to…
I modeled this for my broken P200 micropipetter push button. It is a snug fit but it is a whole lot better than getting a little metal rod into your thumb. The button is one piece and, since it is attached to the volume adjustment knob,…
The 57mm holes fit almost all sorts of bottles used in the hobby. I measured all sorts of containers and found this to be the best size for what I was using. Fits test strip tubes, food containers, water treatment supplies… most…
uses o-ring (size depends on scale, some filing may be required) the bottom is open to glue some semi flexibel foil in place also check if it is watertight can also be used as a pipette
A rotating pipette stand that holds four pipettes. Tested on a variety of models, and they all work fine. Requires a 608ZZ ball bearing (8x22x7mm). Print with the flat(er) side down.
Fixes a crack in the plastic pipette carriage. Printed in Overture PC. Friction fit. Bracket braces by slotting over the T joints marked in blue on the picture.
Simple Universal Pipette Stand (7 Slots + Multipette) here is a clean and simple all-rounder pipette stand that holds up to 7 micropipettes of pretty much any kind . Now New: 90° turned Multipette holder For Stability: To make sure the…
Ever wondered what being a biologist meant in the wild west? Now you can finally feel like a bio-cowboy, by mounting this micropipette holder to your jeans belt, and carry them around with you so you are always ready for a standoff at…
I made this part to replace the whole black plastic carriage in the pipette. I only modeled the left-most mounting screw holes. Those holes were used in the P300 Gen 2 pipette. This is the matching steel rod you'll need to build a…
A remix of the brilliant universal pipette stand by occupied_brain. Now taller and with a fillable base.
The silicone button broke due to regular wear and tear so I printed this replacement from Polymaker Polyflex TPU 90A
Printing Tips For The Lid part I had personally done a 0.1 layer height But I do think that a 0.2 layer height should work just as good. The Cup was printed with a 0.2 and that work well. I believe that if you really don't mind the 0.3…
A holder I made for holding my Graduated Pipettes. I couldn't find anything that served my purpose, so I created this.
Pipette holder compatible with both Avantor® VWR® pipettor and Gilson Pipetman® micropipettes. I recommend using the "fuzzy skin" effect or a bit of sanding on the back side for better adhesion using bi-adhesive tape. Double wall loop and…
Dimensions Around 45 cm tall and 23 cm wide. Objective Our goal was to create a rack for burette storage for chemistry class. It had to take less space and be used as a drying rack for wet equipment, which the teacher can use after…
Replacement spare part push button for Transferpette pipette micropipette. Printed from PEG, snug fit on the metal rod. Bit taller than the original.
The stand can hold test tubes up to a diameter of 28.5 mm and pipettes up to a diameter of 12.5 mm. The pipette holder is equipped with a drip tray. Assembly: Eight M3x6mm screws are required for mounting. Pressure: Material: PETG…
Print two top trays, one bottom tray and then two sides. I uploaded the Freecad files as well.
Nearly every rack we had was broken in at least one spot, so I designed this heavy duty replacement. Just unscrew the top handle and slide this into place. Fits most pipettes fairly well. No supports needed, print with the large flat…
A 3D-printable insert that upcycles empty Clearline pipette tip boxes into an organized benchtop stand for tubes (1.5 ml, 15 ml, 50 ml). Instead of discarding empty racks, this insert gives them a second life, reducing plastic waste in…
2 versions- brimmed and un-brimmed. I designed the stand to be printed on its side, as shown in the image gallery. since I was trying to replicate our previous pipette stand that broke, it is quite thin. This is not particularly friendly…
Pipette holder compatible with both Avantor® VWR® pipettor and Eppendorf Research® plus single channel micropipettes. Also works for Starlab ErgoOne® manual pipettes, and should work for other pipettes with a "hook" like the ones…
we have a test where we transfer one phase from an 2,2mL dwp in an 1,2mL dwp. In our case with a 8-channel pipette.
Remix of excellent 10ml pipette holder, customized for my needs of only 2 pipettes and opengrid shoutout to @YgySytles
Pipette holder 45° or no angle, universal fit Holds pipette at a nice 45° angle, keeping tips off the bench and pipettes visible and grabbable at a glance. The clip wraps around the barrel and fits most single-channel manual pipettes.…
This is the first model of a series for DIY perfume making. A simple friction-fit tag, name, and label holder for basic 3ml pasteur pipettes. It does not prevent the usage of the pipette, but it is a bit uncomfortable to have something in…
45 degree micropipette and microelectrode holders for scanning electron microscopy imaging (SEM). Printed with conductive filament (Protopasta CB/PLA). The 45 degree allows for imaging both sideways and top view of the microelectrode if…
Sartorius holder for Mattittas' modular pipette stand
Die hier gezeigten Ständer waren mir nicht stabil genug, daher habe ich ein 8x8 Feld neu konstruiert. Passt zu meinem ebenfalls neu konstruierten Sortierer.
