4mm Minimal Glass Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi all. This remix was meant to optimize Prusa like beds printing area. I decided to clamp using screws. This way,…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 193
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Hi all.
This remix was meant to optimize Prusa like beds printing area.
I decided to clamp using screws. This way, clamping strength is strong enough to need only 2 clamps, thus optimizing area.
It is designed for M3 bolts and a 4mm glass, but I included 123d design source to be customizable.
I also made a scpecific top part to include yend plate. That way, there is no need to use one extra piece and the area is clean and wide.
Feel free to modify to suit your needs.
Print Settings
Printer:
Prusa I3 Reworked 1.5
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
40%
Notes:
It is best to print the top parts with a 100% infill.
Category: 3D Printer Parts