Liczymy pasujące modele…
I like the modular design of FilarworKs Master Spool, but for me it was lacking some features. I wanted an area to stick a label to without it being unsupported at large portions My refill-filament was too wide for the standard…
Templates currently available: 15ft lines straight offset diagonal 15ft cones orthogonal diagonal 30ft lines straight over three down one over three over two down one over two down one over one diagonal 30ft cones orthogonal diagonal More…
This is a sample print using the Terrain2STL site here: http://jthatch.com/Terrain2STL/ Site parameters were NW corner at (38.8898 N, -77.0752 E), box width 0.05 degrees, box height 0.03 degrees, vertical scaling 4. Other parameters as…
Marker for Area of Effects for Playing Dungeons and Dragons (or other Tabletop RPGs) on a Standard Square Grid (with a width of 1 in / 25,4 mm) This Model includes more Areas (different shapes of Areas) in one Objects, so you don't have…
I like the modular design of FilarworKs Master Spool, but for me it was lacking some features. I wanted an area to stick a label to without it being unsupported at large portions My refill-filament was too wide for the standard…
As far as I am aware, there are two Sortimo L-Boxxes for inset boxes. One is the i-BOXX 72 and the other is the L-BOXX 102. I was looking for some small boxes, but none of the models I found were suitable. Therefore, I created this model.…
This is my first model. I have no clue how to scale so make sure during slicing to scale to fit your headphones.
I love the simplicity of the original insert, but it felt like there was a "missing" tray. I took the opportunity and added bear paw print to both, save filament and aesthetics. Hope you'll like it
Hey! These are my homemade splash guards (mud flaps) for the door sills of the Jaecoo J7. You know how after rain or on a dirty road, all the spray gets thrown right onto the door sills and lower panels? My J7 suffered from this…
Hello everyone! Here are some speaker stands I've created to angle your speakers towards your ears. Unlike existing speaker stand models, mine have an open area where you can fit hardware like Dac / Amps (as I have features in the…
This is a simple one-part front cover for the MaxiBlink RGB kit. It aligns the LEDs and spreads the light to improve the visual effect. It can simply be screwed onto the PCB with 3mm diameter screws (plastic or sheet metal screws…
Part Description Front and rear covers for the RetroBlink kit. Front Cover The main part consists of the light wells for each LED and bosses to screw to the PCB. It should be printed with white filament to reflect and diffuse the light…
Sometimes you need to lay it out clear as mud. Do NOT dumb here. Don't even think about it. Not even a little. And when that fails, just tap the sign. ;)
I made these under side latch things for my Simlab P1X Pro to connect a six-point harness – these are the groin area latches. Advise printing these so that the loop is parallel to the printing bed to withstand most force. Requires M8…
About This project is the successor to my older project . I've redesigned all models from scratch, adjusted tolerances and added a label area for printed labels of up to 9mm height. What's new? There a new inlays with a two-cell width for…
Have fun. Print in whatever you want. Scale to whatever you want. Do whatever you want. I don't care. Green=Grass Blue=Where the duckys go. Black=Where the fuel-guzzlers go. Pls comment if you want any other cities/specific places.
Finding a silica gel box for the Honda ZRV (EU), HRV(US) 11th gen Civic that fit in the little tray area under the centre bridge seemed to be hard, so I took messurements of my one and decided to make a box for myself! there are 4 corner…
This is a simple 2 piece model of the thaad interceptor missile. this model is based solely on this drawing i found on Wikipedia: https://commons.wikimedia.org/wiki/File:Wfm_thaad_diagram.svg
This is a remix of my older V0.2 lower guard just adapted for the belt and without an endstop because there is none. Includes custom supports, feel free to use them or roll your own. For unknown reasons I can't rotate and save the .3mf…
IT: In un’epoca in cui anche il cielo ha smesso di essere solo cielo, questa targa ricorda con sottile ironia che persino i gesti più quotidiani possono richiedere una certa… cautela strategica. Ispirata a dichiarazioni diventate virali,…
I needed to measure the thickness of some parts that had quite small spaces between features and the standard foot size was too large. I could have replaced the top rod and foot with a "needle" type component but I wanted the bottom to be…
I love Star Trek Fleet Captains but those super thin location tiles are prone to scattering every time you make a move, or touch them, or breathe on them. I adapted another hex tile system to work with the game pieces, more or less…
This is a work in progress, but hosting the portion i've done so far. I've made the base structure have quite thin structural pieces so you should hopefully not use infill but just perimiters which will make the print speed much faster.…
Remix of @ChrisAeroEngineering great stackable box with a flat surface on one side for e.g. some sticky notes.
100x160mm sign, reading “Do not Swim in this Area” with a picture of a cactus. Inspired by a meme stream pic that went by of a “no swimming” sign posted in the desert. Best with color switch above 1mm, as with included gcode file. Also…
This is a roof for the loading area of the Schleich pickup truck. I designed it and printed it with 20 % infill with PLA+. For printing turn it around and place it on the roof. Shout out to @SebastianDruckt ! I needed a door for this car…
Marker for Area of Effects for Playing Dungeons and Dragons (or other Tabletop RPGs) on a Standard Square Grid (with a width of 1 in / 25,4 mm) This Model includes more Areas (different shapes of Areas) in one Objects, so you don't have…
I designed a portable power system using a solar panel to charge small 12V SLA batteries, ideal for areas with limited electricity. I utilize this solar-powered system for a hobby project and to illuminate my basement. YouTube link . Key…
This gauge shows the range of a spell and the area of effect in a cone. All targets that fall within the designated range are affected by the spell. Also excellent for showing a range of sight.
you will need flat head screws and chamfer bltouch screw holes to fit them. fits cr nozzles. to fit volcano nozzles i cut bltouch tip for ~1mm. [bltouch] sensor_pin: ^nozzle_mcu:PA9 control_pin: nozzle_mcu:PA8 x_offset: -34 y_offset: 11…
layer 0.2, first layer 0.2 at a height of 1 mm (layer 5) pause or change the material to another color. I used a combination of yellow in the background and blue for the information graphics/text It is of course possible to change the…
Resin printing is a smelly business. Anycubic Photon has for some very strange reason a 50mm fan inside the printing area that fans all the fumes out from the printer. This is really catastrophic so something has to be done. I designed…
CAUTION - BIGFEET BREEDING AREA, AVOID EYE CONTACT, DO NOT USE CAMERA FLASH, SIGN CAUTION - BIGFOOT BREEDING AREA, AVOID EYE CONTACT, DO NOT USE CAMERA FLASH, SIGN I added both variations for whatever the preferred plural might be.…
STOP, THIS IS A BIOSECURE AREA, SIGN Category: Signs & Logos
The long pin… should be on an angle to hook the gate into the closed position like this one https://www.printables.com/model/193865-quick-release-snap-shackle I tried using a spring from a pen, where else can I find a spring easily?…
The STL is a to scale model of the BBL P1S build plate. The SVG or PNG can be used as a background image or just a sanity check that a print will fit into the actual printable area of the P1 X1 build plate. The SVG or PNG may need…
Test pro nastavení středu tiskové desky. Printable area test
Updated 5/17/2025 While I like the simplicity of printing without supports, one of my friends could not get used to angling the tee when putting it into the ground so it ends up straight once at the proper height. I added an updated model…
I took blank version and enlarged labeling area to 13x74mm in order to fit 12mm label. Use case: you have Brother label maker and are obsessed with labeling stuff you dont need no letters printed on card you also think more wider means…
A revision of the light upgrade by Justin Lamply with a black frame and transparent lens. Rear unit also converted to star board. Both parts are connected with a drop of superglue. Lenses needs support. update: After I was unable to…
Didaktická pomůcka do matematiky pro osvojení vlastností obdélníku a výpočtu jeho obsahu.
Printed standing in line with the Y-axis and with supports only for the connectors and the base, draw negative supports for the letters and activate the automatic supports. Nozzle: 0.4 Layer height: 0.16 Infill: 15% Loop Walls: 4…
Small parts bin with a label area for Harbor Freight organizer. Works with 20 Bin Medium Portable Parts Storage Case (Updated to have a taller version based on feedback)
This model is designed for small area flow rate calibrations. The top layer will have solid infill in length starting from slightly less than 0.2mm to slightly less than 10mm. I picked those lengths because those are the ones worked the…
is it a sign, is it a comment? we won't know until the neigbours react
I needed something to fixate the cat scratching board to the drywall. The screws would work themself through the materials when the cat (that fat little fluffball) would have a go at the board. Standard washers werent really working, and…
Miniature closet, for miniature room design, small seat for changing next to it
Spell AoE (Area of Effect) Damage Marker for Tabletop RPG Games on a Standard Square Grid. This Model includes multiple areas in one object, so you don't have to carry 5 to 8 AoE-Markers around. It has also different heights for different…
Increased the hinge opening angle to 270 degrees. Expanded the surface area to accommodate 3M tape.
I wanted to use the Evenflo Versatile Play Space Adjustable Play Area while opened and attached to the wall to get more space from it. I made these wall anchors so that the ends of the gate can attach to the wall. I printed in PETG and…
here is a topo map of the area of Anchorage, Alaska. I will post my make later this week but just wanted to share it.
Want to keep your creations under wraps? Put your workshop on lockdown! A weathered, yellow and black warning sign with the text "Quarantine Area" in bold black letters. Filaments Used: PLA BambuLab Basic Black PLA BambuLab Basic Yellow…
Lampe Gegen Nazis Antifa Area mit OpenScad für verschiedene Größen und Svg Vector Graphic. Außerdem einige fertige STLs. Wichtig : OpenScad braucht die Svg-Datei im gleichen Ordner! Svg basiert auf öffentlichen Quellen. Empfehung: 3mf für…
Adds 1" to your RepRack and a good spot to label the row
This is a topography map of Switzerland in the area of the Thunersee, Brienzersee, Interlaken, Grindelwald, Lauterbrunnen, and Jungfraujoch. The height is 2x exaggerated to have a more pronounced feeling of the height differences. It was…
Model of the area used by the printer (K2 Plus) to calibrate the printing process. Can be removed again after aligning the model to be printed.
The tiles are 150mm by 150mm with 10mm clip extruding. The walls are 50mm high and add 10mm to each side. Endplates add 20mm to plate. There are 2 systems, A 3 clip system I printed and tested for diorama purposes and a 4 clip system that…
This is a remix that uses the scad file provided but the original designer to make a template for every Frosthaven class. I added the Gcode for a .25 nozzle and noted the color I use for each character in the filename. note some…
Hi everyone, I tried so many existing dice boxes. All of them had pros and cons. Since i definately wanted a spinning HP wheel I finally designed a box of my own. It contains: Dice storage in the tower Dice tower Mini storage Movable…
Mark your sink areas with this stylish and functional Sink Area Sign, ideal for kitchens, campsites, or utility rooms. The STL file is designed for dual-color printing, ensuring durability and clarity. Key Features: Dual-Color STL File…
This is a full 3D model of the Alta ski area in Little Cottonwood Canyon Utah. The model is made with real USGS terrain data. It contains the chairlifts as well as all the trails on the mountain. This model was created to be printed on a…
Made for a friend, just a simple easy way to add a boost gauge into a p2 Volvo. No instructions because I didn't install it but should be pretty easy. Pop the old pocket out and slide and snap this gauge mount in after running your…
Sectional scale models of the KDEN Class B and other controlled airspace as depicted on the Denver TAC chart as of 7 February 2025. A great tool for instructors! Vertical Scale: 1in = 10,000ft Horizontal Scale: 1in = 6.82nm (Sectional…
Infinite Area Is A Cube with Things Inside of it. There Are Multiple. They Are Little Tests To test the 3d printer. i do not recommend "infinite-area_4.stl" because it has the biggest file size and it was lagging the website i made it on.…
This model is based on my previous design of Spice jar gadget. If you can't use my original design because of any Jetboil accessories or in case that you pack your stove system assembled. Take a look at this version. This time I focused…
After couple of spice jar holders this time I share two very simple circular boxes. They fit into area of Fluxring - one inside, second under. Then you can maximally use this space
A neat pendant for the extraterrestrial enthusiast! Originally intended for metal casting, it should print fine in PLA or resin.
Aditional Area for Table vise 43D PRINT Good for one-handed people. Dissassembly video: Screws: M5x45mm DIN 7985 Print settings Layer 0,3mm 4walls no support infill 20% Table vise is link here
Just a couple simple parts that snap into the area between the handle and the box on my rolling Kobalt tool chest. Makes use of some wasted space since I rarely move it. One fits 3 average sized drivers and the other is for 2 larger ones.…
I really love the river Danube, so I created this decorative tile showing almost all feeder streams, rivers and creeks from the spring to the delta at the black sea! I included versions for all riparian states' languages too :) Change the…
Cedule označující místo pro kouření, dvě dírky na přišroubování. Změna barva vlákna ve výšce 2,2mm.
It is the same great Monopoly Player Tray / Organizer by BuildX but the left tray for the properties cards is wider for the new wider properties cards.
I created these for my calculus teacher wife to help demonstrate how to calculate the area between two curves. Each model has two versions, 20 slices and 200 slices. The models use the same functions: f(x) = (x/2 - 3)^2 + 5 and g(x) = 1 -…
I know its tedious, but if you have a delta pro do this as your first print, itl save you some headaches. 270mm covers the whole bed so print with no support whatsoever. Category: 3D Printing
"Take Control of the Skies! 🚁 Why settle for ordinary when you can COMMAND attention? This bold 3D 'Drone Zone' sign is exactly what your space needs — striking design, instant impact, and total authority. Perfect for drone pilots, tech…
A quick remix of the air intake blocker by DoDzilla with the warning sign from greath. I wanted to add the sign as a sticker initially, however when I found the model I decided to create the mashup as a stick would likely deteriorate over…
HexaWorld Track is a modular 3D landscape made up of interlocking hexagonal tiles. Each module represents a different type of terrain – from urban areas to forests, fields, deserts, or snowy regions – all connected by a track on which a…
This 3D printable case is designed for the WisBlock Base Board (RAK5005-O) and is fully compatible with both Gen 1 and Gen 2 . ✅ Features: Mounts with 4 standard screws included with the board Cutouts for USB, LED indicators, and SMA…
As far as I am aware, there are two Sortimo L-Boxxes for inset boxes. One is the i-BOXX 72 and the other is the L-BOXX 102. I was looking for some small boxes, but none of the models I found were suitable. Therefore, I created this model.…
Designed for MMU printing. The 3mf is pre colored and prepped for the Bambu A1 Mini on Bambu Slicer. Should be simple to convert to other printers so long as you use that slicer. Low wastage, only a couple grams given how thin you can…
Create this for my wife for her laundry cabinet has no handles when we bought in ikea. I got an idea to create a knob that shows all the product she uses.
I have a friend that has two miniature schnauzers. Both are little villains, and it's in this spirit that I created this sign. Assembly is easy: slide the sign into each holder (glue recommended), then attach the tops. If you don't have…
31mm tall x 26mm deep x 12mm wide Needed a hook to hang cables on between the hook and wall and so I designed this with the mounting tab on the bottom so I have more room on top with this sticking out the least amount possible. Tapered…
These are coin box area covers that I designed for my Bally Flash Gordon restoration. Sometimes the tops of the coin box framing area have holes in the wood or rough surfaces that are hard to sand so I designed these covers (and the tray)…
100x160mm sign, to advise visitors about the negative entropic effects thy may experience in your shop. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in S hadowbox…
100x160mm sign, for warning guests about the Stupid Movie screenings. Don't want innocent, functional minds run into the tripe we watch, damage could ensue. Mesh and Solid (may print easier) models provided. Best with color switch above…
floida teams in the 352 area code buc bolts and rays light box three seperat boxes to put in 3,5,2 for the florida area code . let me know if there needs to be changes . enjoy if you need one made i do all my own cading . files u will…
Another iteration on the ender-6 biqu H2 fan duct setup
A collection of tools for measuring areas of effect on a standard 1 inch:5ft scale map All are 1/16 inches thick and labelled with text 1/32 inches deep. Sizes include: 5ft radius (2x2 inches) 10 ft radius (4x4 inches) 15 ft radius (6x6…
This is my first model. I have no clue how to scale so make sure during slicing to scale to fit your headphones.
Printed in Elegoo Rapid PETG 2 Walls, no supports, quick and easy
I was tired of the virtually-spineless original sliding around like it did, making tangles and such with its fluidity. Who needs fluid guide rails? Don't answer that… Much respect to Area51 for all the great work: this remix is not a dig,…
