Voron V0.2 Z endstop combined with a lower guard to protect the area around the leadscrew
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This combines the Voron V0.2 endstop with a lower guard for the area surrounding the leadscrew.
- Ocena
- 4,889 / 5
- Polubienia
- 125
- Pobrania
- 691
- Wydruki
- 15
- Wyświetlenia
- 3126
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This is a remix of the V0.1 lower bay guard with the stock V0.2 endstop. I made of course some stealthburner-like adaptions :-)
Integrated supports which will snap away with a tiny bit of force.
It used to be a very tight fit at the left side where the screw is going into the extrusion.
I made the left side a bit longer and cut off some length.
Depending on if you're still using the V0.1 chain location or the new V0.2 you have to select either the V0_1 or V0_2 variant.
Please let me know your feedback.