BioBall - 5 TIMES more surface area!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a very small but very powerful bio ball, with a whopping 14,717mm^2 surf. area, 5x more area compared to others.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 228
- Wydruki
- 0
- Wyświetlenia
- 1539
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I took on the challenge to create the most surface area possible in a bio ball while also keeping a design that would let you print without supports: I came up with this design, and while it may not be the most mathematically possible, it is quite a lot in a small easily printable package. Compared to other designs on Thingiverse or Printables, this design allows at least 5 times the surface area for water (or more importantly, bacteria) to be exposed compared to similar or bigger bio balls.
This results in less plastic wasted, and theoretically more water filtered.
Possible surface tension problems may arise if there is too little or too much water flow, it may be recommended to scale this design up by at least 25% to 50% if problems with surface tension occur. This will only increase the surface area of the balls and make them more effective at the same time. Please do small-scale testing to see if these bio balls are right for your particular system.
-Working on a design that will be able to be placed on holding spikes for easy maintenance.
Printed at 0.3mm layer height for faster printing, you may use any height you choose. A .4mm nozzle was used.