XTool F1 Work Area Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This clip can be used to hold down items that are 3-5mm thick in the work area of the XTool F1...
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 217
- Wydruki
- 1
- Wyświetlenia
- 1201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This clip can be used to hold down items that are 3-5mm thick in the work area of the XTool F1. It uses the AL thumbscrews included with the laser or you can buy new screws to use these clips…
Note:
> You can print this clip in any filament you want. (However, a “tough” filament is recommended)
> 15% infill , 3 walls, honeycomb pattern
> Remember to Print 2, side down…
Like it? , please consider donating the small amount of $1 to help me with development and Design… If you own your own business and are going to use this model in your professional office / workshop / SOHO please consider donating $2 … (via: Ko-Fi ) - Thank You!
********
Looking for more XTool F1 related stuff?
Look at all my models! :)