1 / 3
Sunroof Drain Tube Insert for Volkswagen MKIV/A4/B5 — zdjęcie 1
1 / 3

Sunroof Drain Tube Insert for Volkswagen MKIV/A4/B5

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fix that leaky sunroof and the puddle in the spare tire well!

Ocena
0 / 5
Polubienia
13
Pobrania
50
Wydruki
0
Wyświetlenia
700
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The rear sunroof drain tubes appear to have shrunk and pulled away from the ball end fitting, which allows drain water to leak directly onto my headliner.

Pry the hose from the ball end fitting using a flat head screwdriver and a twisting motion to break away the glue. (Apparently it's only glued in two places instead of all the way around)

Heat up the end of the tube with a heat gun to around 100 °C (212 °Freedom) or dip it in boiling water to soften it up, then push the insert in until it bottoms out.

Clean the mating surfaces of the ball end fitting and the drain tube, then re-assemble using RTV or epoxy. Optionally install a cable tie over the ball end fitting.

Apply a light coating of RTV to the inside of the ball end fitting before re-installation.

Finally, enjoy searching for the other water leaks you missed. (RTV the front drain tubes, cut the nipples off the drain hose grommets, clear any clogged drains, caulk the rear air vents behind the rear bumper cover, etc.)

You can find source files on my github as well: https://github.com/XDleader555/cad_models/tree/main/vw_mkiv_a4_b5_sunroof_drain_tube_insert

Tagi