Power Supply Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a two part case for a 150W 12V power supply for the heated bed of my Ultimaker. Designed in Alibre for for…
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 1167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a two part case for a 150W 12V power supply for the heated bed of my Ultimaker.
Designed in Alibre for for this power supply:
http://www.altronics.com.au/index.asp?area=item&id=M8737
with this switch:
http://www.altronics.com.au/index.asp?area=item&id=S3229
and this power socket:
http://www.altronics.com.au/index.asp?area=item&id=P8322
Printed in ABS as the power supply gets pretty hot.
Instructions
Both files print without supports as oriented in the STL files.
The opening for the switch has some bars that are there to remove the need for generated supports as this is the only section that needs them. These parts can be easily broken away to mount the switch. The area is shown in the green image.
The case parts slide onto the power supply and are held in place by friction and gravity.
Please do not attempt the electrical wiring unless you know what you are doing, mains electricity can kill.
Category: Electronics