Caster Wheel adapter for IKEA Adils Table leg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turn IKEA Adils into a rolling table with commonly available office chair casters.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 2149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Wanted a rolling light workbench for crafts so I modified my IKEA Adils table leg to add some office chair wheels I picked up at Home Depot (7/16 stem).
The adapter is held on by the original pad. The adapters are quite a tight fit (I had to bash the legs against the ground to mount) but if you want easily removable casters maybe size up the print to 105%.
I left the hole for the office chair slightly undersized so you'll need to use a 7/16 drill to get a precise fit.
Suggest printing this with the large hole opening UP and no supports, as shown in the picture. The small hole for the caster will bridge over fine.
You'll want to print this at 100% infill, or at least a high infill and enough solid bottom layers to completely support the top of both holes with solid plastic.
!! Year 2 update: So far so good. I had one partial failure where I put extremely heavy objects on the table (think - car batteries) and the print was made with a completely de-tuned backup printer - but it's still holding together. I've got four tables outfitted like this, so not bad.
Category: Office