Nerf Rival Kronos Plunger Seal Shim
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plunger Head Shim for Nerf Kronos / Heracles (and possible other Kronos reshells) Place this shim on the plunger head…
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 49
- Wydruki
- 1
- Wyświetlenia
- 454
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
Plunger Head Shim for Nerf Kronos / Heracles (and possible other Kronos reshells)
Place this shim on the plunger head underneath the O-ring for a tighter seal.
Same concept as the oldschool teflon tape wrapping method to tighten seals; but more permanent -I've had issues with teflon tape squishing out of place.
SML variant doesn't stretch the O-ring as much. use if the tighter seal adds too much drag and becomes a detriment to fps.
Plunger Fill Spacer:
the Kronos Plunger Tube has a very slight Taper at the front;
This narrow area can damage the O-ring seal if using the Above Shim to get a tighter fit.
Therefore, must press fit this shim into the bottom of the plunger tube to block the plunger from entering Tapered section.
Sacrifices a few mm of air volume, in exchange for Seal Durability.
Warning: may need to remove Ratchet Lock from blaster after shimming, depending on spring/spacers used.
Impact resistant material recommended; such as high durometer TPU.
Category: Toy & Game Accessories