Nerf Rival Kronos Plunger Seal Shim
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Plunger Head Shim for Nerf Kronos / Heracles (and possible other Kronos reshells) Place this shim on the plunger head…
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 49
- Makes
- 1
- Views
- 454
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution
Plunger Head Shim for Nerf Kronos / Heracles (and possible other Kronos reshells)
Place this shim on the plunger head underneath the O-ring for a tighter seal.
Same concept as the oldschool teflon tape wrapping method to tighten seals; but more permanent -I've had issues with teflon tape squishing out of place.
SML variant doesn't stretch the O-ring as much. use if the tighter seal adds too much drag and becomes a detriment to fps.
Plunger Fill Spacer:
the Kronos Plunger Tube has a very slight Taper at the front;
This narrow area can damage the O-ring seal if using the Above Shim to get a tighter fit.
Therefore, must press fit this shim into the bottom of the plunger tube to block the plunger from entering Tapered section.
Sacrifices a few mm of air volume, in exchange for Seal Durability.
Warning: may need to remove Ratchet Lock from blaster after shimming, depending on spring/spacers used.
Impact resistant material recommended; such as high durometer TPU.
Category: Toy & Game Accessories