Nerf Rebelle Messenger Barrel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Experimental 'choked' barrel for the Rebelle Messenger the concept is to have a relatively loose fit around the dart…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
Experimental 'choked' barrel for the Rebelle Messenger
the concept is to have a relatively loose fit around the dart for the majority of the barrel.
but a tighter sealing choke section at the front.
This should have similar benefits of a tight barrel seal, but with less friction.
In particular, fdm 3d printing usually causes excess friction from the layer grooves; this is an attempt to mitigate that effect.
Should Not be Used unless the Messenger has first been upgraded to a heavier spring and improved plunger head seal. The stock spring is not suitable for a tighter barrel fit.
Note: Dimensional Accuracy
this was modeled under the assumption that FDM printing will 'shrink' the inside diameters of circles.
While the Mesh model has a choke ring diameter of about 12.5mm. the Physical dimension should come to about 12.3mm.
Different Printers/Filaments may need to use Dimensional Compensation slicer settings.
Category: Toy & Game Accessories