Nerf Rebelle Messenger Barrel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Experimental 'choked' barrel for the Rebelle Messenger the concept is to have a relatively loose fit around the dart…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 145
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution
Experimental 'choked' barrel for the Rebelle Messenger
the concept is to have a relatively loose fit around the dart for the majority of the barrel.
but a tighter sealing choke section at the front.
This should have similar benefits of a tight barrel seal, but with less friction.
In particular, fdm 3d printing usually causes excess friction from the layer grooves; this is an attempt to mitigate that effect.
Should Not be Used unless the Messenger has first been upgraded to a heavier spring and improved plunger head seal. The stock spring is not suitable for a tighter barrel fit.
Note: Dimensional Accuracy
this was modeled under the assumption that FDM printing will 'shrink' the inside diameters of circles.
While the Mesh model has a choke ring diameter of about 12.5mm. the Physical dimension should come to about 12.3mm.
Different Printers/Filaments may need to use Dimensional Compensation slicer settings.
Category: Toy & Game Accessories