Maker Select V2 / Wanhao / Duplicator: Extruder Heatsink Radial Fan Adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
50mm Radial Fan (snail fan) adapter for Monoprice/Wanhao Maker Select Extruder cooling. -the stock 40mm Axial heatsink…
- Ocena
- 4 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 1
- Wyświetlenia
- 311
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
50mm Radial Fan (snail fan) adapter for Monoprice/Wanhao Maker Select Extruder cooling.
-the stock 40mm Axial heatsink fan is weak. Inadequate extruder cooling can be a problem, especially if using an upgraded all-metal hotend. Needs more cooling to avoid heat-creep traveling up the filament and jamming the extruder!
This heatsink duct converts it to use a 50x50x15mm snail fan.
-Compatible with popular Z-Brace Frame mod.-
-Compatible with popular 'Diicooler' hotend cooling mod.-
A similar concept exists here: https://www.thingiverse.com/thing:2060590
However that one mounts the fan to the side of the head and would collide with Z-Brace Kits.
As that particular thing does not allow remixes, I had to create my own model from scratch. Mine mounts the fan out front, to avoid collision with Z-Braces.
Category: 3D Printer Parts