Ball head for light cameras
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Open Source Universal Ball Joint by DieZopfe is fun to play with. I made some ball heads with Arca-Swiss plates…
- Ocena
- 4 / 5
- Polubienia
- 30
- Pobrania
- 53
- Wydruki
- 1
- Wyświetlenia
- 868
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Open Source Universal Ball Joint by DieZopfe is fun to play with. I made some ball heads with Arca-Swiss plates (not published yet) and therefore I cut the nut in two halfes with a larger collar holding them in place. I used that design even for this project.
A 30 mm long Whitworth screw is needed. No glue is necessery.
Made for light cameras. Combine the ball head with the table tripod by Sketchpunk.
Links: https://www.thingiverse.com/thing:4739696 https://www.thingiverse.com/thing:1442127
Print Settings
Printer Brand:
MK3
Printer:
Prusa i3
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
15%
Filament: Clas Ohlson PETG Any color
Category: Camera