MPMD (V2) new bottom plate with 80mm fan & riser feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MPMD (V2) new bottom plate with 80mm fan & riser feet
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 239
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
New bottom plate with 80mm fan & riser feet for better cooling.
I used an Arctic Silent F8TC with temp. sensor and the MPMD stays stable at 30°C. But any other 80mm silent 12V will do as well. I run Arctic Silent F8 fans on my Ender 3 without any issues for some time now …
Some explanation of the files:
RiserFeet.stl = need to be printed upside down, with supports
RiserFesst.stl_CS = same like above but for counter sunk screws
RiserFeet_SL.stl = can be printed normal/ without supports, sacrificial layer (SL) will ensure it prints well. (holes can be cut through later with a drill bit or some force)
SquashBallFeet.stl = need to be printed upside down, with supports
FanDuctM3.stl = version for M3 screws
FanDuctM3_RD.stl = rounded version for M3 screws
FanDuctM4.stl = version for M4 screws
FanDuctM4_RD.stl = rounded version for M4 screws