ZK-12KX Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3D printable case for the ZK-12KX Step-Down DC-DC Converter with CC / CV for battery charging.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 364
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a 3D printable case for the ZK-12KX Step-Down Converter. It is to be used instead of the acrylic that is supplied with the board. The Step-Down converter is typically used for DC-DC battery charging and it supports both constant current and constant voltage modes with automatic switching.
Print settings:
0.15-0.25mm layer height. 3 shells. Infill doesn't matter as it will print solid. Can use PLA, but a higher temperature filament may be beneficial.
Re-use the hardware supplied in the kit. The stand offs, 3mm screws and switch caps.
Remixing ideas:
-Reduce size of cut out for lights, add text legend.
-Add vents to the backside for additional heat dissipation.
-Add mounting for a small fan if necessary.