ZK-12KX Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 3D printable case for the ZK-12KX Step-Down DC-DC Converter with CC / CV for battery charging.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 82
- Makes
- 0
- Views
- 364
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This is a 3D printable case for the ZK-12KX Step-Down Converter. It is to be used instead of the acrylic that is supplied with the board. The Step-Down converter is typically used for DC-DC battery charging and it supports both constant current and constant voltage modes with automatic switching.
Print settings:
0.15-0.25mm layer height. 3 shells. Infill doesn't matter as it will print solid. Can use PLA, but a higher temperature filament may be beneficial.
Re-use the hardware supplied in the kit. The stand offs, 3mm screws and switch caps.
Remixing ideas:
-Reduce size of cut out for lights, add text legend.
-Add vents to the backside for additional heat dissipation.
-Add mounting for a small fan if necessary.