Stavros' light and airy DJI AU holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A light, secure, airy, and convenient DJI AU+camera holder, for external mounting on planes.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
I needed a DJI AU/camera holder for my Drak, and I couldn't find one that was very light, let airflow through, held the AU securely but still took minimal effort to remove (so I can hotswap), so I made one.
There's a latch that mounts on a hinge and secures on the camera's screws, so after you unscrew the camera to take it out, you just raise the latch and take the AU out as well.
It's 67 grams with the AU and camera on it. You can either use an M3 screw or a piece of filament for the hinge holder.
Some supports required for the latch.
If you want to remix it, here's the OnShape model.